Power FC lock timing on power fc
#1
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: In the Sky
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
lock timing on power fc
hi everyone..im gonna help my friend install the his single tubo and power fc set-up..hes got the Datalogit software and i was wondering if theres a way to lock timing to set your base timing w/ the datalogit?
thanks!
thanks!
#3
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: In the Sky
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Jodeny
S-,
I believe there is however I don't understand what you mean by base timing.
John
S-,
I believe there is however I don't understand what you mean by base timing.
John
what i mean is to lock timing at a fixed point such as 20*ATDC for T1 so your light would hit the "pointer" on the front cover..basically to confirm your base timing is correct
#4
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
No, but! You would have to be out of the idle range and put the same timming in all the cells that will be around the rpm area that you will be using.
Then with a calibrated timing wheel, you could do it. Would also have to use the trailing plug to get single sparks which would be easier to see.
Then with a calibrated timing wheel, you could do it. Would also have to use the trailing plug to get single sparks which would be easier to see.
Thread
Thread Starter
Forum
Replies
Last Post