Power FC Hmm, Need to have PFC relearn
Hmm, Need to have PFC relearn
I installed it, but I only let it idle until it smoothed out, I did not let it idle alone, with a/c, then with all electrical loads. Now when I turn on my a/c on 1,2,3,4, the rev drops LOW on the virge of stalling. Will relearning the idle fix my problem? Or is it another problem on its own? I only cut the 4wires, and did not splice the last a/c wires.
How can I reset the ecu with my datalogit?
Thank you!
How can I reset the ecu with my datalogit?
Thank you!
What are your 3 idle speeds set to. For non-emmission testing I use 850/900/950. Many of these cars to idle correctly, you have to adjust the idle air bleed screw.
Adjust by 1/2 turns until ball park the 1/4 t find tune.
Teaching how to do the air bleed screw and how it affects idle is very time consuming so basically:
if opened a little extra revs drop slower down to idle with less chance of dying, closed too much is the opposite.
Yes reset it.
Adjust by 1/2 turns until ball park the 1/4 t find tune.
Teaching how to do the air bleed screw and how it affects idle is very time consuming so basically:
if opened a little extra revs drop slower down to idle with less chance of dying, closed too much is the opposite.
Yes reset it.
The first thing I did after buying my car was buy the Mazda Shop Service Manual. Then I read and studied it.
I expect this of all serious owners who plan to work on their own cars.
Reset and adjust!
I expect this of all serious owners who plan to work on their own cars.
Reset and adjust!
Eats, Sleeps, Dreams Rotary
Joined: Nov 2003
Posts: 3,082
Likes: 0
From: kali
Re: Hmm, Need to have PFC relearn
Originally posted by kevinvr6
I installed it, but I only let it idle until it smoothed out, I did not let it idle alone, with a/c, then with all electrical loads. Now when I turn on my a/c on 1,2,3,4, the rev drops LOW on the virge of stalling. Will relearning the idle fix my problem? Or is it another problem on its own? I only cut the 4wires, and did not splice the last a/c wires.
How can I reset the ecu with my datalogit?
Thank you!
I installed it, but I only let it idle until it smoothed out, I did not let it idle alone, with a/c, then with all electrical loads. Now when I turn on my a/c on 1,2,3,4, the rev drops LOW on the virge of stalling. Will relearning the idle fix my problem? Or is it another problem on its own? I only cut the 4wires, and did not splice the last a/c wires.
How can I reset the ecu with my datalogit?
Thank you!
nice
Thread
Thread Starter
Forum
Replies
Last Post