Power FC help: No speed monitor on PFC
12-28-01, 12:11 PM
#1
Full Member
Thread Starter
Join Date: Sep 2001
Location: Orange County, CA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
help: No speed monitor on PFC
My speed monitor function on my PFC does not work. it just shows 0mph (or kph). Everything else looks good. anybody have any ideals what it might be?
12-29-01, 12:00 PM
#2
20B N/A Wide Body FC3S
The speed sensor input wire is probably pulled out of the connector going in to the Power FC, or not getting a signal... Down load the Apexi AVC-R instructions from the Apexi' site and go to the computer diagram for your year and model FD and you can find the speed input wire, (also the injector, rpm, power, ground, map sensor wires) then check out that wire on the harness...
Chris
Chris
Thread
Thread Starter
Forum
Replies
Last Post