Power FC Help
Help
Guys I having a problem here, low voltage no start. I run a PFC (serial #415-z002 w/ commander FCC2zg0002-0006), with most of your basic mods, intake exhaust FMIC. Getting Spark, and fuel, but no crank.
My question for you is do these two work together? I know there are 2 versions of the commander, wanted make sure these are the compatible.
Two, When I go the try to crank the car now, The Apexi symbol is the only thing that shows up on the FC Commander screen. It has worked before, I've had it in the car for 7-8 months.
My electrical connections are sound from what I have seen. I rechecked everything I could get to (I removed the UIM and ignition coil, no rats nest) and removed all the resistors I had placed in the nest before I had the PFC.
If its not the computer I am all out of ideas. Anything I could try would be appreciated and if you need more info, let me know. Just bare with me if it takes a while to respond.
My question for you is do these two work together? I know there are 2 versions of the commander, wanted make sure these are the compatible.
Two, When I go the try to crank the car now, The Apexi symbol is the only thing that shows up on the FC Commander screen. It has worked before, I've had it in the car for 7-8 months.
My electrical connections are sound from what I have seen. I rechecked everything I could get to (I removed the UIM and ignition coil, no rats nest) and removed all the resistors I had placed in the nest before I had the PFC.
If its not the computer I am all out of ideas. Anything I could try would be appreciated and if you need more info, let me know. Just bare with me if it takes a while to respond.
stuff i tried
I plugged in Datalogit, and the PFC checks out, I loaded a new map, reset it for a stock map, just changing the 1300 injectors. So its not computer related. Thanks for at least looking. This one is a hard one for me to diagnose.