Power FC Good PFC map for Twins and street port?
02-11-10, 06:33 PM
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2006
Location: Vancouver, BC
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Good PFC map for Twins and street port?
Hey guys, im curious if anyone has a decent tune for Twins, with a Street ported engine.
The PFC stock map is much to lean for my set up, and my wideband hits in the 13's at high boost. im getting it tuned this summer, but would like a decent base map to start off with.
Thanks!
Mark
The PFC stock map is much to lean for my set up, and my wideband hits in the 13's at high boost. im getting it tuned this summer, but would like a decent base map to start off with.
Thanks!
Mark
02-17-10, 01:44 PM
#4
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2006
Location: Vancouver, BC
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Well i went into the PIM voltage under the PFC. And upped the % at all of the RPM range. Well @ 1000rpm i lowered it to 86% so that my car dosent idle at 12afr. But now the car Rips hard, and hits 10-10.3 afr as it should under boost!
Thanks to Kan, for the helpful advice!
-Mark
Thanks to Kan, for the helpful advice!
-Mark
