Power FC Freezing commander and base map for a single turbo?
09-20-10, 09:06 PM
#1
"Insatiable challenge!"
Thread Starter
iTrader: (4)
Join Date: Mar 2010
Location: Beaverton OR
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Freezing commander and base map for a single turbo?
Hi folks,
Hoping someone on here has ever had this happen to them. I have a commander that keep freezing up on me. The values all lock, but you can navigate through it fine. I am changing the commander tomorrow to test it, but its strange- the datalogit has no problem.
As far as the base map goes, I have tried a few (BDC, ect) and have not found one close to what I am looking for. Just needing something I can mod a little until we can get some dyno time. Car is a Medium Street Port, T67 turbo, FMIC, Supra Pump, 550/1680 CC injectors, Aeromotive FPR, and no cat. If anyone has something close to that, I would greatly appreciate it.
Hoping someone on here has ever had this happen to them. I have a commander that keep freezing up on me. The values all lock, but you can navigate through it fine. I am changing the commander tomorrow to test it, but its strange- the datalogit has no problem.
As far as the base map goes, I have tried a few (BDC, ect) and have not found one close to what I am looking for. Just needing something I can mod a little until we can get some dyno time. Car is a Medium Street Port, T67 turbo, FMIC, Supra Pump, 550/1680 CC injectors, Aeromotive FPR, and no cat. If anyone has something close to that, I would greatly appreciate it.
09-21-10, 11:14 AM
#2
The commander will not respond when actively logging data with the data logit.. only one device can talk to the PFC at a time basically and the datalogit must request more often... every once in a while the commander might get an update... If you don't have the laptop FC-edit software doing something maybe it is simply a loose cable or soemthing?
sorry I don't have a map that is close to yours...
sorry I don't have a map that is close to yours...
09-21-10, 01:22 PM
#3
"Insatiable challenge!"
Thread Starter
iTrader: (4)
Join Date: Mar 2010
Location: Beaverton OR
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Even with no datalogit, it does it. Strange I know... I will try my spare commander.
I think the secondaries are leaking, the tips are wet after cranking and when it is not flooding out, it runs 11.1 AFR at idle. Good thing I have a spare set somewhere around here.
I think the secondaries are leaking, the tips are wet after cranking and when it is not flooding out, it runs 11.1 AFR at idle. Good thing I have a spare set somewhere around here.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM