Is there any way to tell if the ignition is indeed firing using the PFC? The car will turn over but wont fire, and I know I have fuel....so I'm trying to narrow down my ignition problem.

 

NO!

Unless you have an O-Scope, test it the way most people test it.

 

just unplug one spark plug wire at a time and put a spare sparkplug in the boot. then ground the plug to the engine or frame, crank it over and see which wires fire. It is really not hard to do that. If you don't have a person that can crank the car over for you, run a seperate +12 v switch into the engine bay that goes to the starter so you can crank it over yourself while holding the plug.