Power FC FC-Datalogit Users Required!
FDrx7.com
Joined: Oct 2004
Posts: 160
Likes: 0
From: Sydney Australia
Originally Posted by Max13BREW
Ok...using all the information gathered from here..and using a 1.391 3rd gear (Which appears to be a more correct gear ratio for third gear), I also used a .30 CD, as it appears my cars is between the R1 and the base model (I have the front lip..I have a spoiler on the rear..but I also have the series 7 spoiler which is meant to be less effective than the series 6 version)
After I verify accuracy against a dyno I will share again..
Pete,
How do you think this graph would compare in real life, on a real dyno?
Thanks for the help guys, if this works out somewhat accurate I will be buying the product. Also thankyou for fixing the metric / imperial problem.
After I verify accuracy against a dyno I will share again..
Pete,
How do you think this graph would compare in real life, on a real dyno?
Thanks for the help guys, if this works out somewhat accurate I will be buying the product. Also thankyou for fixing the metric / imperial problem.
More like the range of 270kph so something majorly wrong there it seems.
Slave2TheFD
Joined: Mar 2001
Posts: 658
Likes: 0
From: Nevada City, CA
I have an old log from a couple years ago when I had a datalogit hooked up for an hour or so and tried to run it through Data Log Lab.
How do I pick a section where I am in 3rd gear?
I have 6000 lines in my graph from just driving around, and it's probably not flat, I remember driving up and down a hill.
Thanx!
How do I pick a section where I am in 3rd gear?
I have 6000 lines in my graph from just driving around, and it's probably not flat, I remember driving up and down a hill.
Thanx!
Thread Starter
Junior Member
Joined: May 2003
Posts: 20
Likes: 0
From: UK
Hi Peter.
Unit conversion has been added, software's awaiting packaging and uploading to the Data Log Lab web site whilst we tweak a Toyota Celica FC-Datalogit definition file. Remember Vmax is a theoretical calculation that would require perfect gearing to be achieved, i.e. RPM at which peak power is reached combined with a top gearing to give Vmax at that RPM - all a bit hyperthetical really. Those RX-7 Cd and frontal area figures are what makes the speed so high, but their standard calcs that can be found on the net and calculated through for yourself.
Jedon - sounds like you're unlikely to get useful figures from your data log - you really do need a section of data log that covers a single gear acceleration from low RPM through to the red line, though it doesn't matter what gear you're in.
Glenn
Data Log Lab Support
www.dataloglab.com
Unit conversion has been added, software's awaiting packaging and uploading to the Data Log Lab web site whilst we tweak a Toyota Celica FC-Datalogit definition file. Remember Vmax is a theoretical calculation that would require perfect gearing to be achieved, i.e. RPM at which peak power is reached combined with a top gearing to give Vmax at that RPM - all a bit hyperthetical really. Those RX-7 Cd and frontal area figures are what makes the speed so high, but their standard calcs that can be found on the net and calculated through for yourself.
Jedon - sounds like you're unlikely to get useful figures from your data log - you really do need a section of data log that covers a single gear acceleration from low RPM through to the red line, though it doesn't matter what gear you're in.
Glenn
Data Log Lab Support
www.dataloglab.com
