Power FC FC datalogit recognized by FC edit
#1
Racerxrx7
Thread Starter
Join Date: Mar 2002
Location: Orlando, FL
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
FC datalogit recognized by FC edit
I just received a FC datalogit and I was wondering what I need to do to get my computer to recognize the Datalogit. I bought the USB interface which is being recognized by the computer. Do you have to change com ports, turn engine on before. What steps do I have to go through?
Thanks for the help.
Aldo
Thanks for the help.
Aldo
#2
fart on a friends head!!!
for some reason its different with different computers/connections. when i had usb and another laptop i had to change the com to either 3 or 5. i was able to simply turn the program on whenever i wanted. . . now, with a doodoo laptop with serial connection i have to have the car in the ON position (not started) and on com port 1. . . THEN and only then can i "read all". . . and THEN start it. weird
so yeah, first of all, try different com ports. . . if they dont work while the engine is running. . . then try them all w/o the engine running and simply in the "ON" position.
so yeah, first of all, try different com ports. . . if they dont work while the engine is running. . . then try them all w/o the engine running and simply in the "ON" position.
#3
Racerxrx7
Thread Starter
Join Date: Mar 2002
Location: Orlando, FL
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
datalogit interface
Thanks for the info. I unfortunately haven't had anytime to play with it. I had boyfriend duties yesterday. I have friend come in today, so I won't have a chance till tomorrow. At least I can have somewhat of an idea what is going on.
Thanks once again.
Racerxrx7 (Aldo)
Thanks once again.
Racerxrx7 (Aldo)
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
pfsantos
2nd Generation Specific (1986-1992)
1
09-30-15 01:29 PM