I'm looking for the pin-out from the PFC or I was hoping someone would be able to tell me where the output to run an electric fan is. I'm running this in an FC and have just switched to an e-fan now, having no idea how to wire the PFC to control it.

I've searched but have only come across the AC issue, not the stock cooling fan control. If I missed something obvious let me know. Thanks in advance.

 

terminal 3D is the relay switch for fan 1 on the fd....fan 2 is run in series from fan 1s relay to a parrallel cuircuit between the thermo switch and the a/c switch relays.

 

Thanks alot for the help

 

nm

 

here is a how-to that we came up with for our S5 Vert 13b-re with the FD Power FC, use pin 3D as stated above instead of the source wire configured with our adapter harness.

http://www.banzai-racing.com/efan_re...all_how-to.htm

 

bringing this back from the dead...

What is the default temp the efan will turn on if you don't have a datalogit to adjust it?

 

100'C for fan 1