hey all... Im hoping someone here can help ( would be nice if they live in the SF bay area )... I just got my DIY WB and Datalogit to talk to each other.. the problem I have is that the A/F reading are Really low.. I logged my FD with the smog pump disconnected as it was suggested on the datalogit forum.. I have a 3" DP and the WB bung welded a foot from the cat end.. I didnt see the air pump connected to the DP.. But the readings with the air pump are in the mid 20's.. the strange thing it my FD smells rich at idle. Anyway I have loaded the log and map for everyone to look at… hope someone can give me some pointers..

Also if someone could look at the map it would be great


LOG http://www.deeboo.com/dusty/dusty-9-6-03


MAP http://www.deeboo.com/dusty/dusty9-6-03.dat

Tek

 

What values did you plug in for the ploynomial in FC-Edit?

 

didnt change it

 

! Ding! Ding!

We have a winner!

You have to change the values!

A=1.6344
B=-2.1693
C=9.9414

You might want to check that since that is just by memory. You know where to check it? In the Datalogit YAHOO groups?

 

where do a b and c go?

 

Click the "Poly" button. A new window will popup and you will be able to enter A, B, and C.

 

thanks