Power FC Datalogit user group
DAPDAS
Calling someone an *** that is trying to help you help yourself is immature at best. Noone here tries to be an *** but sloth-like unmotivated posers that don't want to put any effort into helping themselves ... sorry for that rant, back to not being an ***.
Read about the recalc feature and you should understand why you are seeing 1.000's in that map. In short, the recalc feature will recalc the BASE map with all the INJ map adjustments and it will reset the INJ map to all 1.000's. Go read the manual, search this forum, read this forum, play with the Datalogit, then post some insightful questions about details you cannot comprehend and most folks here will type ad naseum to help.
Calling someone an *** that is trying to help you help yourself is immature at best. Noone here tries to be an *** but sloth-like unmotivated posers that don't want to put any effort into helping themselves ... sorry for that rant, back to not being an ***.
Read about the recalc feature and you should understand why you are seeing 1.000's in that map. In short, the recalc feature will recalc the BASE map with all the INJ map adjustments and it will reset the INJ map to all 1.000's. Go read the manual, search this forum, read this forum, play with the Datalogit, then post some insightful questions about details you cannot comprehend and most folks here will type ad naseum to help.
O please, I didn't understand what you where talking about and all you had to do was help me out like you just did. Say what you will but your replies them selves were immature if you ask me, plus calling my a poser....sure I have been a member here for quite some time and about 85% of the time I search and figure the problem out on my own, evident from my number of posts. Anyway thank you for your help.
Last edited by NESpeed; Jun 17, 2006 at 07:46 AM.
Trending Topics
We expect people to show initiative by: reading and studying the PFC and/or DATALOGIT manuals, and playing with the COMMANDER and/or FC_Edit software on their PC/laptop. After this, if they have intelligent questions, we will help.
Asking questions for things easily covered in the manuals or observable with the COMANDER/software, shows that the person is not bright enough to own the car or is lazy.
Asking questions for things easily covered in the manuals or observable with the COMANDER/software, shows that the person is not bright enough to own the car or is lazy.
read, is the best way to learn, is a few home made books out there that will explain step by step and help you understand the datalogit software, people before me and you took the initiative to make those PDF files for our learning experience, i recomend you that read and do a lot of research before you start messing up with the comp, after that it will be easier to tune the car, and get a LM-1 wide band it will help
my 2c
my 2c
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
Oct 9, 2015 10:05 PM




