I currently have the PFS or EFI purple computer. While it is not as flexible as the PFC or other ECU's, I like the three position switch which allows you to step up Boost and fuel curves with a click of a switch. I am looking at the PFC because I like it's monitoring functions as well as the fine tuning capabilities (Dyno tuning). My question is, with Datalogit can you build maps that would allow a stock or tame map for emmisions or valet mode, a mid map for mid level performance, a high map dyno tuned for close to maximum performance but safe. and finally an all out map for running a straight thru exhaust with no cat. Can these maps then be downloaded to the PFC via laptop?

 

No it does not have that. With a laptop and DATALOGIT connected to the PFC, you could quickly load in different
maps like you want.

But the unit does provide two places to easily and quickly change fuel by map sensor voltage or by rpm.
And one place to make across the board IGL/IGT changes.

 

cewrx7r1, thanks for your reply. Can Maps be saved on to discs and downloaded to the PFC via laptop? Sorry if I am being repetetive.

 

Yes they can via the datalogit

STEPHEN

 

You can hook up a switch to SW4 on the datalogit box to switch between boost settings one and two.

This is one way to set up a valet mode.