Power FC commander displaying incorrect readings...
#1
Rotary Freak
Thread Starter
Join Date: Aug 2008
Location: San Diego, CA
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
commander displaying incorrect readings...
i just had my car shipped to new york from south carolina, now that its here the commander is displaying all kinds of weird readings. i have it set to display 8 different things, and now they are all "highlighted" around the reading. im getting an rpm reading way off of the tach reading, injector duty crazy high at idle just to name a few. i cant feel any difference in performance but these readings are ridiculous.
i tried unplugging the commander and disconnecting the neg terminal with no luck. ive already had the power fc tuned before and dont really want to start all over with the initial settings. ive gone over the english manual and searched the forum with no luck(probably didnt search long enough).
anybody ever had any problems like this or have any advice how to fix it.
i tried unplugging the commander and disconnecting the neg terminal with no luck. ive already had the power fc tuned before and dont really want to start all over with the initial settings. ive gone over the english manual and searched the forum with no luck(probably didnt search long enough).
anybody ever had any problems like this or have any advice how to fix it.
#2
Double Dose
iTrader: (1)
It's showing your peak most likely. On my commander if something is highlighted it's only showing what my peaks were. When you're in the display mode press up and it shows your peak. And I believe you press it again to remove it, or maybe you press down. Been a few months since I last drove the car...
Thread
Thread Starter
Forum
Replies
Last Post