Power FC cold start enrichment
#1
73 13B 4 port
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: atlanta
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
cold start enrichment
Hi, changed my fuel system to 1600 cc secondary, and now I am having trouble starting my car when cold. Can anyone tell me how to change cold start enrichment on PFC? What should the setting be? When the car is warm, no trouble starting @ all.
Thanks
Thanks
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Read the manual page 31 and experimnt, that is how we leaned.
Analyze what you are trying to do and figure out how it can be done with what the PFC/Commander gives you. Hint: go between the monitor where it shows water temp and the map for changing cold start fuel by water temp.
If cold start was good before the 1600 install, and is now bad; then your tuner messed something up or changed something affecting the idle.
Analyze what you are trying to do and figure out how it can be done with what the PFC/Commander gives you. Hint: go between the monitor where it shows water temp and the map for changing cold start fuel by water temp.
If cold start was good before the 1600 install, and is now bad; then your tuner messed something up or changed something affecting the idle.
Last edited by cewrx7r1; 11-14-05 at 10:12 PM.
#4
73 13B 4 port
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: atlanta
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
@ full throttle, it runs great. I do think I fixed the cold start problem now, I increase the number @ 50 degree ( cranking ) and now the car starts without problem..thanks
Thread
Thread Starter
Forum
Replies
Last Post