Power FC Base maps/boost setting ?'s
09-09-01, 05:56 PM
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: nh
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Base maps/boost setting ?'s
I am running the base maps with the mods below. I do not have a commander yet so I cannot check into this myself. But i had the understanding that the PFC comes with two boost setting one for 10psi and another for 12psi. Right now I am only seeing 10psi and wanted to know if this is what I should be seeing or if the base setting is for 12psi.
Thanks
Grant
Thanks
Grant
09-09-01, 08:25 PM
#2
Retired RX7 mechanic
Join Date: Feb 2001
Location: Long Island, NY
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Since you dont have the commander, the boost should only be 10 psi. You can't switch it with out the commander.
There are 2 settings with the PFC...
stock boost settings on the PFC is 10 PSI and 12 PSI
There are 2 settings with the PFC...
stock boost settings on the PFC is 10 PSI and 12 PSI
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM
