RB25 powered FD Build!
#181
High Comp Booster
iTrader: (4)
Join Date: Apr 2009
Location: Oakville, Ontario
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
Thank god You changed the Subframe Id bet that if you were to slide in to a curb or take a hard enough hit You would shear those long bolts right off
Pretty Sick I love the sound of an Rb even tho i'd never swap one in I prefer the 1jz its much cheaper here in canada I can get a Complete swap Out of a front clip for about $2gs the rb25/6 got for much more than that
Pretty Sick I love the sound of an Rb even tho i'd never swap one in I prefer the 1jz its much cheaper here in canada I can get a Complete swap Out of a front clip for about $2gs the rb25/6 got for much more than that
#183
RX-347
iTrader: (2)
Holy ****; I can't believe I'd not seen this until now.
I hope that you've redone every inch of work (and exhaust) that was under that car when the subframe was reworked. I've seen some ghetto work before, but, wow, words fail.
At least the new stuff you've pictured is, better. I don't know that I'd say "great" but, definitely better.
Good luck with your plans with it. A few more drafts and you might actually have something.
I hope that you've redone every inch of work (and exhaust) that was under that car when the subframe was reworked. I've seen some ghetto work before, but, wow, words fail.
At least the new stuff you've pictured is, better. I don't know that I'd say "great" but, definitely better.
Good luck with your plans with it. A few more drafts and you might actually have something.
#185
RB Power!
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Belleville, IL
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Holy ****; I can't believe I'd not seen this until now.
I hope that you've redone every inch of work (and exhaust) that was under that car when the subframe was reworked. I've seen some ghetto work before, but, wow, words fail.
At least the new stuff you've pictured is, better. I don't know that I'd say "great" but, definitely better.
Good luck with your plans with it. A few more drafts and you might actually have something.
I hope that you've redone every inch of work (and exhaust) that was under that car when the subframe was reworked. I've seen some ghetto work before, but, wow, words fail.
At least the new stuff you've pictured is, better. I don't know that I'd say "great" but, definitely better.
Good luck with your plans with it. A few more drafts and you might actually have something.
#191
RB Power!
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Belleville, IL
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Im not really sure what kit they are for. I bought them on ebay for like $250. My light kit is all peiced togeather and the fitment is not as good as I would like. Im going to sell the whole kit and by something else eventually.
#193
Rotary Enthusiast
Another RB25 RX-7! Have you got a thread on this? I want to do an RB26 one.. I am sure I will get plenty of stick for it! It has only been done twice that I can find and guess it is a bit more of a mission to do! But hey.. That's the fun! I have been following this thread on and off and fair play to you buddy..
What did you do on the electrics/ECU side.. I don't remember reading anything about that. Was it hard?
Keep up the work.
Lee
What did you do on the electrics/ECU side.. I don't remember reading anything about that. Was it hard?
Keep up the work.
Lee
#196
RB Power!
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Belleville, IL
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Another RB25 RX-7! Have you got a thread on this? I want to do an RB26 one.. I am sure I will get plenty of stick for it! It has only been done twice that I can find and guess it is a bit more of a mission to do! But hey.. That's the fun! I have been following this thread on and off and fair play to you buddy..
What did you do on the electrics/ECU side.. I don't remember reading anything about that. Was it hard?
Keep up the work.
Lee
What did you do on the electrics/ECU side.. I don't remember reading anything about that. Was it hard?
Keep up the work.
Lee
#197
RB Power!
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Belleville, IL
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
I will have pics of the motor and the car all painted when I move in my new house here in a month or so.
#200
Full Member
Join Date: May 2009
Location: New Hampshire
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Just wondering; does the rb pull pretty hard in the fd??? im picking up my mounts, aluminum driveshaft+ a bunch of other parts for my swap this upcoming weekend. and also picking up my series 2 rb25 this weekend. pretty damn excited to start in on the swap