I was kidda Scared
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Guntersville, AL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
I was kidda Scared
Alrihght look, my 85 is a project for a very low budget drifter. Yes, I mean drifter. Turning the car side ways, I've done it for awhile so i don't want tyo hear about the lack of expeareance. Yeah, I don't want to hear about my spelling either, I knoe I cannot spell(and yes cannot is a word.) OK what i came to tell you. I am taking a 85 RX-7, and I'm putting a piston motor in it. I know BLASPHEMY, because I'm puttin a piston motor in a RX-7. I'm doin the RX-7 good though. It will have between 400 aqnd 500 horses if I've calculated right. It will be a turbo 2.3 mustang motor, top opf the line valvbesw and springs everything thing done, motor bored out 30 thousths tell me if there3 is anything left out.
Thanks
SPNCR
Tell me your guys input not matter what it is
Spncr
Thanks
SPNCR
Tell me your guys input not matter what it is
Spncr
Last edited by spncr; 10-14-07 at 12:19 AM.
#2
FNZOOM
iTrader: (1)
Join Date: Jun 2007
Location: MN
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
make sure you have the rest of the drive train setup for such a powerful rig. driveshaft, rearend, and subsequential supports to prevent twisting and help hook up.
If you would do a recipe list could probly give better input.
If you would do a recipe list could probly give better input.
#3
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Guntersville, AL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Yea didn't really remember writing this. I was really drunk haha.
2.3 mustang 4 cylinder
bored 30 thousandths
rebuilt head
top of the line valves and springs
over sized injectors
turbo
mustang rear-end
The body I stole from who ever did the integra conversion. I saw it in the 1st gen pics looked sweet so I'm gonna do it too. No big wing though!!!!
I guess thats about it.
2.3 mustang 4 cylinder
bored 30 thousandths
rebuilt head
top of the line valves and springs
over sized injectors
turbo
mustang rear-end
The body I stole from who ever did the integra conversion. I saw it in the 1st gen pics looked sweet so I'm gonna do it too. No big wing though!!!!
I guess thats about it.
Thread
Thread Starter
Forum
Replies
Last Post
alfred1976
RX-7 Audio/Visual Lounge
3
12-03-15 03:06 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
tmak26b
2nd Generation Specific (1986-1992)
16
03-05-02 12:32 PM