Originally Posted by 1931-smooth7
(Post 8518393)
lol, well, stop talking and start building.
Originally Posted by FCNAred
(Post 8518284)
we aren't talking about something that has been done like a v8 rx7, we've got enough of those that they have their own forum. I think what we're talking about is something that no one has actually seen yet, an EJ in an rx7. As far as a rotary in an impreza, that's also the only one i've ever seen and the first thing i thought of when i saw this thread.
you can stop personally attacking me now if that's ok, I only see one person acting like a child here and that would be you. I'm not sure why you think being disrespectful is an acceptable means to communicate but I guess that is the way things work on forums these days. I've only been on here for seven years so I really wouldn't know anything about that. I'm not personally attacking you. Sorry if you feel that way. Truth be told, the first thing that I thought of when I saw this thread was that very same Imprezza but I didn't post up that exact same pic that I have saved, nor did I even mention it BECAUSE IT IS COMPLETELY IRRELEVANT. That is the only point that I am trying to make but like I said a few posts back, you are going to battle me on it. We're not talking about a rotary in an imprezza that you brought up. We're talking about dreamers and swapping a Subi boxer into an FC. |
no updates hey...
|
It's so crazy it just might work!!
|
any word on this thing. im guessing you relised you will pretty much need a tube frame front end to do this well.
|
i seen this swap the other way(several years ago)A 1994 boxy legaxy LS with a 13B TURBO all wheel drive swap,The car was build in a town named HORMIGEROS in Puerto Rico,my uncle assisted with swap.
|
wow...atleast show a little support lol.
i would like to see an fc with awd even better if it was a 13b or a 20b(dreaming...) instead of an ej...shut it and build it....no half A$$ing neither |
Originally Posted by SouthSideSlider
(Post 8673709)
any word on this thing. im guessing you relised you will pretty much need a tube frame front end to do this well.
|
That would be sweet. have you started on anything?
|
regrettably I have been unable to procede due to the fact that I got laid off and have to begin the process of moving again.
looks like you win TTT, this project will never see the light of day. |
Newb - you should know -
1) I am always right 2) Always 3) I win, always |
Originally Posted by TitaniumTT
(Post 8749365)
Newb - you should know -
1) I am always right 2) Always 3) I win, always |
bit of a revival.. but any further news on this? did it happen?
would love to see the build and pics as am interested :) |
i too am gunna be the asshole to bring this from the dead...but reading through i saw a lot of hate and little info...i am tempted to do this though as i have a EJ255 just about ready to go into my RS...but i miss my FC sooo much i thought to try and do this...only issue i see right now is the post in here about the steering column not working...any more info on that?? cause my buddy said he measured up the EJ33 to his brothers FC chassis and it would fit....tightly...but if i can get some more info on the steering i might go ahead and try it out.... (id do it myself but im currently deployed to afghanistan right now....lol)
|
Originally Posted by TitaniumTT
(Post 8515139)
It's not hate that is pouring from me. It's an EPIC amount of doubt. The reality of it is that most people when they try to do these things have NO idea what they are getting into...
Getting the swapped engine/trans in place is actually the easiest part of the project- and almost the cheapest. The domino effect of such a swap is unbelievably pervasive, you'll end up in every nook and cranny of the car before you finish and it gets increasingly difficult to muster the will to keep chasing down the details. I wish the OP success and would like to see documentation of his project. Edit: Oopsie, didn't bother checking the dates. I guess TTT was right. |
Originally Posted by Ricer240sx
(Post 10898332)
i too am gunna be the asshole to bring this from the dead...but reading through i saw a lot of hate and little info...i am tempted to do this though as i have a EJ255 just about ready to go into my RS...but i miss my FC sooo much i thought to try and do this...only issue i see right now is the post in here about the steering column not working...any more info on that?? cause my buddy said he measured up the EJ33 to his brothers FC chassis and it would fit....tightly...but if i can get some more info on the steering i might go ahead and try it out.... (id do it myself but im currently deployed to afghanistan right now....lol)
My suggestion would be to just go ahead and do it if you are confident enough. You are more likely to get bullshit answers from people making assumptions by asking questions on this kind of topic around here. Any problem can be solved if you are serious about working them out. I have worked on subarus and RX7s and had the engines out of both. I have also swapped a 20b as well as an ls1 into an RX7. From my experience I would say you are looking at an above average level of difficulty swap but I would love to see it done. Let us know if you decide to tackle it. |
I hate to post in this old thread but i must. Frame is too narrow, I've considered it myself. Don't want the rotary in my TII, my shop has a few ej25 laying around. So i said why not.
But once i broke the tape measure out its way too complicated and too much fab work is involved for it to be even remotely plausable. Sorry but like mentioned before, tube frame or bust |
As a former Subaru owner (02' Impreza, 525whp), I must chime in and say that the EJ is about the dumbest engine you could chose for a swap. I think the only good reason would be, as above, if the motor was flat-out free.
|
GOD DAMMIT
you got my hopes uppp |
|
1 Attachment(s)
|
nice!! what did u do for trans??
|
2 Attachment(s)
W58 from a celica/supra.
Attachment 694266 Attachment 694267 Found a guy that made bell housings mainly for making 4g63s rwd and begged and pleaded with him. And also chopped up a tranny, sent a bunch Of clutch parts and a year and a half later I had this beauty in my hands. He is currently casting and selling them. |
Portland huh? I wouldnt mind taking a look at this thing, ill be in portland (Tigard)until sunday. Would like to chat about the bellhousing situation and who has said piece.
|
I'm actually going out of town tomorrow.
The guy that builds them actually is in your end of the world, at least the state anyways. Bill's Auto Fabrication - Toledo, Ohio If you have any questions just ask away. |
Wow, very close to me! Thank you Sir!
|
All times are GMT -5. The time now is 01:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands