As some of you may be aware, I have responded negatively to people posting threads. I was tired of hearing people continuously complaining about the parts they were getting and the customer service or lack there of that they were recieving.

I have to come out publically here on my own thread and appologize to those I have criticized about this This is not because of my own dealings, but because of the number of complaints that I have read about here and on TC about parts failures. When I read about one members subframe failure causing him to spin into a fence while AutoXing, I realised that I was wrong.

It is a good thing to warn others about problems that have been encountered. It is one thing for a part not to fit as advertised, but for a part to fail and cause an accident, that is another thing entirely.

So, to Jim, and whoever else I have or may have offended, I offer my public appology. There is no excuse for shoddy workmanship that puts peoples life in danger.

Later,

Bill.

 

Yeah, that's the big rub. We're enthusiasts. Nobody drops an LS1 into an FC or FD to put around like a grandma. A part failing like that on a busy highway at 70 mph could be disastrous.