rare car mazda rx-4?
09-14-08, 08:47 PM
#28
Newbie
Join Date: Sep 2008
Location: oceanside
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
i could use a **** load of parts from that car if you aint gonna jump on it i would sure like to know were it's located. i got a 74 rx4 automatic that i'm trying to make stickshift. thx
09-15-08, 04:47 PM
#29
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Valley Mills, Tx
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Ok since I hve no reason to mess with it as i have too many cars already its located in bellmead, tx shoot me a -e-mail @ j.oliver23@yahoo.com and i will give you the wrecking yards location i just didnt want anybody to go look and tell me it was a peice of junk or not worth your time
06-29-09, 06:24 PM
#31
Senior Member
Join Date: Dec 2007
Location: Burleigh Heads Qld Australia
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
RX-5's are heavier and less attractive.
But this is what I call a heavy old school mazda rotary.......3,500 pounds!
http://www.trademe.co.nz/Trade-Me-Mo...-226194026.htm
But this is what I call a heavy old school mazda rotary.......3,500 pounds!
http://www.trademe.co.nz/Trade-Me-Mo...-226194026.htm
[IMG]
06-30-09, 08:38 PM
#38
Junior Member
Join Date: Oct 2007
Location: Ohio
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
I see the cosmo, and I think disco. C'mon can't you see the cosmo being a car in cannonball run if the movie was made like 3 years earlier? They could have tricked it out, and the Japanese guys in the movie would have driven it. Way cooler than that z car (I think) they drove.
Speaking of disco, those gold rims would look perfect on my rx4 wagon. are they 4/110? Or did they get the 114s on the cosmo?
Speaking of disco, those gold rims would look perfect on my rx4 wagon. are they 4/110? Or did they get the 114s on the cosmo?
07-01-09, 07:40 AM
#39
I daily drive a 76 Cosmo. I have another with roll cage and Lexan windshield that was raced in SCCA. I also have a 74 RX-4 and 2 parts cars with many parts. All but the Cosmo I drive and the complete RX-4 are FS. I've had people say they want parts. No one comes through. Talk is very cheap, particularly here.
Cosmo has 4 wheel disk brakes (10" front, 11" rear), 14" 4X120 wheels and coil springs all around. Very nice driving car. Mine will out run a stock 1st or NA 2nd gen. It has a GSLSE engine with Dellorto and SP Racing Beat exhaust.
http://intertron.com/ron/
Cosmo has 4 wheel disk brakes (10" front, 11" rear), 14" 4X120 wheels and coil springs all around. Very nice driving car. Mine will out run a stock 1st or NA 2nd gen. It has a GSLSE engine with Dellorto and SP Racing Beat exhaust.
http://intertron.com/ron/
10-31-09, 06:28 PM
#48
Rx4s and Cosmos can be cool cars if they are done right, they can also be one hell of a sleeper as well. Sweet rides 74Rx4, I have the a set of the Amer Racing rims for one of my cosmos also, and I used the same LE rims on my Rx4, I also have that same airdam i haven't mounted it yet because I am getting the lower valance and the airdam molded into one piece. I like how you used paint on the 4 to accent the natural body lines.
Right now my is dull grey which is ok because it has a blown 13b 6 port under hood pushing about 300hp at the flywheel but the s/c gives me enough torque at low end to twist the chassis all up. The dull paint has gotten me out of more tickets than you can imagine.... what do you mean I was doing 110mph in this POS you've got to be kidding....LOL
Right now my is dull grey which is ok because it has a blown 13b 6 port under hood pushing about 300hp at the flywheel but the s/c gives me enough torque at low end to twist the chassis all up. The dull paint has gotten me out of more tickets than you can imagine.... what do you mean I was doing 110mph in this POS you've got to be kidding....LOL