Newbie with a GLC project
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Texas
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Newbie with a GLC project
Picked me up a little project.
I will post pics of my progress as I go.
I am painting it BMW alpine white and redoing the interior. Also will be por15 the under carraige.
http://cgi.ebay.com/ebaymotors/ws/eB...4672538&rd=1,1
I have already stripped the interior and I am cleaning up the wiring. I am also trying to figure out this Holley as I have never owned a carbed car. I will be doing my reading in the archives for awhile.
I will post pics of my progress as I go.
I am painting it BMW alpine white and redoing the interior. Also will be por15 the under carraige.
http://cgi.ebay.com/ebaymotors/ws/eB...4672538&rd=1,1
I have already stripped the interior and I am cleaning up the wiring. I am also trying to figure out this Holley as I have never owned a carbed car. I will be doing my reading in the archives for awhile.
Trending Topics
#10
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Texas
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I will not be swayed by the purists . It will be white. I may cruise it orange for a while though as it seems I need a few more things to get this thing daily road worthy like a fmoc, better radiator and electric fan, better alternator, new carb, regulator, I also want to throw my 6al msd I have sitting around on it so I need a couple of coils. I found two rx7's in the junk yard the otherday one with a 12a and one with a 13b and both with 5 speeds. I might buy both engine and tranny's because the yard owner said he would sell them for $250. I am getting into this rotary thing. I love it. My mustang has been getting neglected since I got this glc. I want to take out the 4 speed and put a 5 speed in it. The wiring is pretty nasty to so I am thinking about a painless harness seeing as this thing still uses those little glass fuses lol. I am rambling on but here are some pics of stripping it down for painting the roll bar and floorpans.