my ride
#1
Full Member
Thread Starter
Join Date: Feb 2003
Location: RSA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
my ride
Hi
Thought you might enjoy some pic's of my 72 beetle running with a 13BT S4 rotary engine
http://www.users.bigpond.net.au/dheiler/charles3.jpg
http://www.users.bigpond.net.au/dheiler/charles2.jpg
http://www.users.bigpond.net.au/dheiler/charles1.jpg
As you can C allot of work went in here but at the end of the day its all worth it
CYA
Thought you might enjoy some pic's of my 72 beetle running with a 13BT S4 rotary engine
http://www.users.bigpond.net.au/dheiler/charles3.jpg
http://www.users.bigpond.net.au/dheiler/charles2.jpg
http://www.users.bigpond.net.au/dheiler/charles1.jpg
As you can C allot of work went in here but at the end of the day its all worth it
CYA
#4
Full Member
Join Date: Jan 2003
Location: Auckland, New Zealand
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Props
I never completely finished my one - got as far as unroadworthy rotor hack. Mine had 13B J-port Weber etc... but was just way too loud and I couldnt sort any decent brakes to pull it up. The whole thing was positively lethal.
But I love hearing of finished RX-Beetles well done and what a unique conversion.
I never completely finished my one - got as far as unroadworthy rotor hack. Mine had 13B J-port Weber etc... but was just way too loud and I couldnt sort any decent brakes to pull it up. The whole thing was positively lethal.
But I love hearing of finished RX-Beetles well done and what a unique conversion.
Trending Topics
#8
Likes to swear....alot
iTrader: (3)
Join Date: Dec 2002
Location: Kitchener Ontario Canada
Posts: 3,791
Likes: 0
Received 3 Likes
on
3 Posts
Yeah, my dad and I are wanting to build a square tube chassis using 2nd gen suspention and a supercharged '74 4 port 13B and then dropping a beetle shell over it.
The motor would be in the front and we'd have to shorten the drivshaft, but otherwise i think it would work.
The motor would be in the front and we'd have to shorten the drivshaft, but otherwise i think it would work.
#9
Full Member
Thread Starter
Join Date: Feb 2003
Location: RSA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
spec's on the 72 S4
Hi
Glad you enjoy what i have done to the car
She ran a 14.2 with .3 bar boost over the 1/4mile
and 13.8 with .6bar same day just a bit later
I think she can do better but not with me behind the wheel
The motor is bone stock pushing +- 95kw and 190nm
on .3bar
and with .6 she makes 108kw and 215nm all at the wheels
not allot but enough to play with other cars
The gearbox has
1x super diff with 4 spider gears
close ratio 3&4
with some bigger side shafts and thicker side plate
exhaust
has 1x free flow box from tnt with 63" pipe from turbo to box all in all not even 1m long
ecu is mt8 from microtec
running the fuel and ignition
ignition is 4x bosch coils with crank angle sensor
other than that she has a monster tach some sound and disks brakes up front and stage 1 drums at the back with bucket seats
hope this answers all the questions
Glad you enjoy what i have done to the car
She ran a 14.2 with .3 bar boost over the 1/4mile
and 13.8 with .6bar same day just a bit later
I think she can do better but not with me behind the wheel
The motor is bone stock pushing +- 95kw and 190nm
on .3bar
and with .6 she makes 108kw and 215nm all at the wheels
not allot but enough to play with other cars
The gearbox has
1x super diff with 4 spider gears
close ratio 3&4
with some bigger side shafts and thicker side plate
exhaust
has 1x free flow box from tnt with 63" pipe from turbo to box all in all not even 1m long
ecu is mt8 from microtec
running the fuel and ignition
ignition is 4x bosch coils with crank angle sensor
other than that she has a monster tach some sound and disks brakes up front and stage 1 drums at the back with bucket seats
hope this answers all the questions
#10
Junior Member
Join Date: Jun 2005
Location: Portsmouth, UK
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rotoryrocket1
Yeah, my dad and I are wanting to build a square tube chassis using 2nd gen suspention and a supercharged '74 4 port 13B and then dropping a beetle shell over it.
The motor would be in the front and we'd have to shorten the drivshaft, but otherwise i think it would work.
The motor would be in the front and we'd have to shorten the drivshaft, but otherwise i think it would work.
rotorbeetle i think your perfomance figures are a little low...have you compression checked the engine and turbo?
Thread
Thread Starter
Forum
Replies
Last Post
AMOC
SE RX-7 Forum
1
09-10-15 09:42 AM