Cosmo Rx5 rubbers needed
06-08-06, 02:51 PM
#1
Cosmo Rx5 rubbers needed
Ok guys i need some help here(although I love my cosmos it isn't that way get your minds out of the gutter), this is probably going out more to our "down under brothers" rhyme intended.
I need some NOS cosmo door seals, window seals and truck(boot) seals
I am working with a 78 cosmo, so Rx-5, cosmo, 121 from the same year(76-78 here in the US) group should work
I would also be interested in any NOS trim parts or a NOS lower valance that you might be able to locate.
This is for a very special project that i hope to be able to tell you about in the future. However my good buddy Dan Atkins can verify that if it happens it will be sweetest thing to happen to Old School Rotaries in a long time.
PS Dan bug you dad I need a price on the rubbers he pulled aside for me (you know i can never have too much protection)
I need some NOS cosmo door seals, window seals and truck(boot) seals
I am working with a 78 cosmo, so Rx-5, cosmo, 121 from the same year(76-78 here in the US) group should work
I would also be interested in any NOS trim parts or a NOS lower valance that you might be able to locate.
This is for a very special project that i hope to be able to tell you about in the future. However my good buddy Dan Atkins can verify that if it happens it will be sweetest thing to happen to Old School Rotaries in a long time.
PS Dan bug you dad I need a price on the rubbers he pulled aside for me (you know i can never have too much protection)
06-08-06, 03:39 PM
#2
Former Site Sponsor
Join Date: Aug 2003
Location: Tacoma WA
Posts: 4,368
Likes: 0
Received 0 Likes
on
0 Posts
rotarydude I will ask dad about YOUR "rubbers" and make sure that there are no holes in them too.. L0L....
I also should have a quote for you on the little door chrome parts too here by early to mid neXt week...
B.T.W. for thoes of you that dont know rotarydude he is not B.S. you all, and he is telling the truth...so please be paitence and you al will see what is going down...
Later
Dan
I also should have a quote for you on the little door chrome parts too here by early to mid neXt week...
B.T.W. for thoes of you that dont know rotarydude he is not B.S. you all, and he is telling the truth...so please be paitence and you al will see what is going down...
Later
Dan
Last edited by Atkins Dan; 06-08-06 at 03:48 PM.
06-09-06, 02:56 AM
#3
No distributor? No thanks
iTrader: (6)
Join Date: Oct 2003
Location: Outskirts of Road Atlanta
Posts: 3,438
Likes: 0
Received 6 Likes
on
4 Posts
http://www.scottsoldautorubber.com.a...80%20COUPE.htm
They've got everything you've asked for, minus the door seals. If you can get a real good picture of the door and where the seals run, there's a chance we can tell you what other seals would fit. They come (from Scott's, anyway) with a molded corner, a bag of clips, and 6 feet of material in each direction from the corner. It's up to the owner to cut and trim to get the right "circumference" of the door frame, so other stuff might fit fine.
They've got everything you've asked for, minus the door seals. If you can get a real good picture of the door and where the seals run, there's a chance we can tell you what other seals would fit. They come (from Scott's, anyway) with a molded corner, a bag of clips, and 6 feet of material in each direction from the corner. It's up to the owner to cut and trim to get the right "circumference" of the door frame, so other stuff might fit fine.
06-09-06, 12:58 PM
#4
Thanks Crit i had them on my Favorites already,
Between them and what I managed to talk Atkins out of i have most of the pieces i need except the door seals themselves, I wish that i was able to use something else however with the way they did the cosmo the closest thing would be an Rx-4 coupe and the custom molded endcaps would be way wrong (and unfortunately for me a piece i can't lop off and glue back on)
Between them and what I managed to talk Atkins out of i have most of the pieces i need except the door seals themselves, I wish that i was able to use something else however with the way they did the cosmo the closest thing would be an Rx-4 coupe and the custom molded endcaps would be way wrong (and unfortunately for me a piece i can't lop off and glue back on)
Thread
Thread Starter
Forum
Replies
Last Post
freq
2nd Generation Specific (1986-1992)
5
08-22-15 06:46 PM
