B2200 Tranny...
#1
Turbo Mazda MX-3 Owner
Thread Starter
Join Date: Jul 2004
Location: East Wenatchee, WA
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
B2200 Tranny...
Ok, Does anyone know if there is just an adapter plate or something for this? In my search to create a monster, I have found out that the tranny out of a MX-6/626 in the late 80's mates to the same 2.2L SOHC engine out of the B2200 trucks. So From what I have read is that normally people just either use a rx7 transmission, or they swap the bellhousings, neither of which I could use if I wanted to do a FWD 13B. If anyone could help me out I would appriciate it. And yes, I realize it is FWD, but I have a 13B sitting here and can get a MX-6 tranny for $25 so I could have some fun
Thanks
Thanks
#3
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,841
Received 510 Likes
on
345 Posts
Only thing I can say is to pick up that 626/MX-6/Probe tranny and see if the RX-7 bellhousing bolts up. C'mon. What's $25?
You MAY have to trim the input shaft is all.
You MAY have to trim the input shaft is all.
#5
Junior Member
Join Date: Jan 2006
Location: Sacramento, CA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Did you try Kennedy Engineered Products? They make a bunch of bellhousing adapters (including a few for rotaries) and may have what you're looking for, or be able to tell you if it will work without one...
Thread
Thread Starter
Forum
Replies
Last Post
drago86
2nd Generation Specific (1986-1992)
1
09-27-04 07:13 AM