California style

I was looking at a 616 Coupe (RX2) and was thinking about fitting some OZ Ultraleggeras in a 15 x 7 ET 18 with a 4x 108 PCD.

I know this is not the 4 x 110 RX2 fitment but I heard wobble bolts will work fine? What is the stud pitch and info required to get the correct bolts?

From what I've read here that offset should work fine with that width and fit no issues. with a 205/50/15 tyre all round? Or maybe slimmer fronts?

Any help or comments greatfully appreciated.....

rxtasy3

iTrader: (2)

if the 616 is the piston version of the rx2, it should be the same 4x110. had an 808 once and it was the same 4x110 pattern as the rx3. thread pitch i think is 12x1.5mm or 1.25. just take one of the lug bolts to an auto parts or hardware place and check it.

California style

Yes it's the same as RX2. I edited my original post to add that as well.....

73rx313b

iTrader: (40)

My advise, Find the correct bolt pattern wheels. I am not a fan of the wobble bolts.

California style

I figure 108 to 110 is pretty close and I work with OZ Racing. Also I used them before on an Abarth 500 I had and they seemed fine.....

Whats the RX2 Centre bore? Anyone know?