1976 REPU Build
#52
I actually own Rotaries
iTrader: (40)
as always.... looks great!! good job Billy
#54
Full Member
First came the frame & suspension restoration. I cleaned the frame up and sprayed it with POR15 and then truck bed liner.
The rear end is from a GSL-SE. I cut off all the 4 link brackets and welded on leaf spring pads. The rear leaf springs were sent to a drive line shop and de-arched 2". New rear leaf spring bushings were installed. All new bushings and ball joints were used to rebuild the front suspension.
Front shocks are bilstein for a camaro. Springs are 525# with a 2" drop. Front brakes have been converted to TurboII calipers and rotors. Rear brakes will be stock GSL-SE.
The rear end is from a GSL-SE. I cut off all the 4 link brackets and welded on leaf spring pads. The rear leaf springs were sent to a drive line shop and de-arched 2". New rear leaf spring bushings were installed. All new bushings and ball joints were used to rebuild the front suspension.
Front shocks are bilstein for a camaro. Springs are 525# with a 2" drop. Front brakes have been converted to TurboII calipers and rotors. Rear brakes will be stock GSL-SE.
Sorry to dig up the past, but do you have any more info in the brake swap in the front?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM