Tri-cities se7ens...
#27
Im using Mazdapunk87 now.
Thread Starter
Join Date: Jul 2006
Location: (714) and (509)Kennewick,WA-Tri-cities
Posts: 378
Likes: 0
Received 1 Like
on
1 Post
you might have a problem with that one...one of the guys i work with talks to him on the GTO forum and if i heard him correctly...thats the GTTO ,its Twin turbo'd and roughl guess of 800hp ... ill double check with the guy i work with but pretty sure thats what he said
#33
Rotary Enthusiast
iTrader: (6)
Join Date: Mar 2006
Location: The Evergreen State (WA)
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have any tools that I can use to work on porting my engine. LOL Or if someone has experiece I'd appreciate the help. I am repulling the motor this week. And Eric I am almost finally done with my swap. Took me forever to collect all the parts but I'm just about done well after the rebuild and port of my engine. LOL So I guess I'm far from done. Damn... Anyways yeah that is the Integra I'm talking about. The exhaust was hella ugly.... Who the hell would do that, through the center of the bumper? Did anyone hear of Kazenspeed's little project, they want to take an FD and put an S2000 motor in it (F20C ir F22C). I heard about it and was kinda surprised. Just curious of what's everyone's view on it is?
#34
Im using Mazdapunk87 now.
Thread Starter
Join Date: Jul 2006
Location: (714) and (509)Kennewick,WA-Tri-cities
Posts: 378
Likes: 0
Received 1 Like
on
1 Post
Anyone have any tools that I can use to work on porting my engine. LOL Or if someone has experiece I'd appreciate the help. I am repulling the motor this week. And Eric I am almost finally done with my swap. Took me forever to collect all the parts but I'm just about done well after the rebuild and port of my engine. LOL So I guess I'm far from done. Damn... Anyways yeah that is the Integra I'm talking about. The exhaust was hella ugly.... Who the hell would do that, through the center of the bumper? Did anyone hear of Kazenspeed's little project, they want to take an FD and put an S2000 motor in it (F20C ir F22C). I heard about it and was kinda surprised. Just curious of what's everyone's view on it is?
#35
95R2
iTrader: (5)
Anyone have any tools that I can use to work on porting my engine. LOL Or if someone has experiece I'd appreciate the help. I am repulling the motor this week. And Eric I am almost finally done with my swap. Took me forever to collect all the parts but I'm just about done well after the rebuild and port of my engine. LOL So I guess I'm far from done. Damn... Anyways yeah that is the Integra I'm talking about. The exhaust was hella ugly.... Who the hell would do that, through the center of the bumper? Did anyone hear of Kazenspeed's little project, they want to take an FD and put an S2000 motor in it (F20C ir F22C). I heard about it and was kinda surprised. Just curious of what's everyone's view on it is?
#36
Im using Mazdapunk87 now.
Thread Starter
Join Date: Jul 2006
Location: (714) and (509)Kennewick,WA-Tri-cities
Posts: 378
Likes: 0
Received 1 Like
on
1 Post
Okay found out on that Black and Silver GTO...its twin turbo setup , and i mis-quoted the 800 hp on it ... its only making 550 HP at 7 psi .
#37
Get Sidewayz
Join Date: Mar 2005
Location: Washington
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
An s2000 motor.... I dont know if I like it. I'm partial to keeping the rotary rotary but I would almost think there would be better motors then an s2000 motor..... I guess it can rev high... Tell them to not be geh and just put a 3 rotor in one if they want to play like that.
#42
i think justins fc v. that gto will be a good race. how much power do you have justin? 450?? when will your car be back together. oh and by the way, i go matts message today and called him back but hedidnt anwer. should i get mycar towed over to your shop?
#43
dont kill the cones
eric should give him a run for his money if he doesnt hit his "wev wimmitor" (inside joke) and if not then justin. and a port and rebuild kit from atkins cost me a 1000 cash so whoever was asking it doesnt cost too much
#44
Senior Member
Join Date: Jul 2002
Location: Richland Wa.
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
My car will not be back up and running for quite a while, but I will just say that when its back together that GTO will be fun to toy with... As long as nothing breaks!
Wade, I still don't understand what problems you are having with your car? I will give you a call tonight.
Wade, I still don't understand what problems you are having with your car? I will give you a call tonight.
#45
My car will not be back up and running for quite a while, but I will just say that when its back together that GTO will be fun to toy with... As long as nothing breaks!
Wade, I still don't understand what problems you are having with your car? I will give you a call tonight.
Wade, I still don't understand what problems you are having with your car? I will give you a call tonight.
it has all these little leaks, but kaizen started dealing with them so i'm not sure whats up anymore. Secondly, after everything was put back together, and the car was started up, there seemed to be a 'whining' noise. Since the belts seemed fine, i thought that i might have done something to the turbo when i removed it and possibly moved the turbine to the point where its contacting the housing a little bit, but aaron cake said it probabaly isnt that because its hard to do that to a turbo; he said its a vacuum leak. I had some cold start issues, and my car was running when it went to kaizens, but ever since they have tinkered with it, i talked to reid and its not running anymore.. so i guess i would just like the car to be started and running properly, is that possible??
#47
Get Sidewayz
Join Date: Mar 2005
Location: Washington
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Burn in hell, die a million deaths. See who puts together your motor!