renton area ignition help
10-31-10, 03:25 PM
#1
renton area ignition help
current setup is using 2 msd's, 2 coils running through cap/rotor. won't start, just single click. need to relocate the msd's (currently under the wipers, not so good for nw weather, orig owner in California). I'm really slow when it comes to electrical issues, so looking for someone in the area or willing to hit Renton highlands to give me some help.
I can pay for time to help out, or trade some oem parts (steering wheel, tail lights, reflectors) or just fill you up on beer on a sunny day (if it will show itself).
I can pay for time to help out, or trade some oem parts (steering wheel, tail lights, reflectors) or just fill you up on beer on a sunny day (if it will show itself).
10-31-10, 08:42 PM
#4
The Outsider
iTrader: (1)
Join Date: Jul 2003
Location: Deep in 6th
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Well is the msd running straight out of the ignitors, or do they plug into the pickups from the dizzy. Don't worry about chasing the trailing side, its not all that important. I have a had two msd's 6A go bad on me, so don't forget to check them as well. If your using the ignitors for a signal source just toss them out, you don't need to use them. Probably just a power issue to the msd's check the power leads and fuses
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
2nd Generation Specific (1986-1992)
19
09-15-15 12:03 AM