need help got 2 bolts off of clutch slave but cant get the last bolt off the one that has rubber tube coming out of it.. trie WD-40 does not help .. any suggestions... thks jason

 

you need to put the two bolts back in to secure the slave cylinder to the tranny. Then you can work on getting the hose off. Try some PB rust buster, auto zone or the like will have some, works great. Also you may want to get a flare wrench for removing brake lines, so that you have more contact with the hose fitting. Hope that helps

 

thanks for info i just removed it completly off from other connecting point by fire wall. got more leverage by holding it on the ground and that worked great , but thks for the info on pb rust buster....