In need of help, I’m looking for a shop or person that anyone can recommend on completing my project. Let me explain to you what I have had done so far and bought. Engine wise, I have had my cast irons lapped at racing beat, my rotors 3mil from atkins rotary and rotor housing ceramics coated. I have had my engine mild street ported and all put together by local by the name of lopie from auto import a while back from around Jan or Feb of last year. Since then I have had a friend who is garaging the car and engine, rotate it every two weeks and make sure it was lubricated with royal purple (oil). Everything was kept and labeled to the last screw, so no fear of anything missing. I have replace everything from a new started, alternator, altima battery. In fact here a list of what I do have:
RX7 1993 Single Turbo

UPGRADE

Koyo racing radiator
XS Power Intercooler
44mm Tial wastegate
50mm Tial Blow off valve
ACT Street and Strip clutch and Pressure Plate
Act prolite fly wheel and counter weight
Greddy Turbo Timer with harness
Greddy Profec B-Spec II with harness
HKS Twin Power Pack
Moroso 8mm spark plug wires
Autometer Cobalt oil pressure gauge
Autometer Cobalt water temp gauge
Autometer Cobalt Boost gauge
Autometer Cobalt Wideband
APEXI ECU
Data logit motorsport
Drilled/Slotted Rotors
APEXI Commander
Samco Sport Colant hose
Sard fuel pressure regulator
Walbro fuel pump 255 liter per min
primary 850cc injectors
secondary 1600cc injectors
KGPARTS fuel rail
Greddy elbow
NGK spark plugs
JDM shift knbo
K&N oil filter
Aluminum pulley's
RE-Amemiya oil cap
RE-Amemiya tail light cover
Vielside/Combat Body kit
Combat wing
Z 3 fenders
Optima battery
HKS Carbon Titanium Exhaust 3"
MOMO trek steering wheel
MOMO atomik shift ****
MOMO atomik e-brake
AST
Steel engine mounts
Polished work by Slonsho the rip off:
Upper intake manifold
Lower intake manifold
Starter- autozone.com
Alternator bracket
Thermostat cover
Water pump
Water pump housing
Throttle body
Power steering bracket
Block off plates
Engine work by Lopie Auto Import:
Rotor housing and engine cover ceramics coated
Cast irons lapped at Racing Beat
E. Rotors 3mm
Mild street port
Tranny work by Jeff's Automotive:
5th gear synchro replace
Gm 3 bar map sensor
SS oil pump lines
Starter
Alternator
Tripower gauge
Full pulley set unothadox
Single turbo Holset HX50
Oil pan by ground zero
Act cobalt wideband
Stainless steel brake lines
Dual oil coolers
Down pipe and mid pipe
Block off plates
Quick release NRG
Adapter hub NRG
Lower intake by ground zero
Zex nitrous system
Alarm
Coilovers Apexi
Headlight kit
Seibon hood
Sway bar set front and back
PFC holder Gothamracing
SS brake lines
B&M short shifter
STRUT BAR Taunabe

That’s everything that I bought so far, what ever is missing then who ever is putting it together shop or person I will just let them put it in and I will pay for it. This is only for engine work just to get her going again. Not body that will be taken care of by another shop. This all have to be done in a month to a month and a half . The reason why I’m hot on time, I’m in the Army and I ’m returning from Iraq in Jun or Jul and I have three months to get her going again before my next duty station that is either Germany or Italy. And I can’t leave her behind. So if anyone can recommend a shop which would be the ideal or a person that is equipped with what I want done and this has to be well known to do good work I would very much appreciate it. If it makes a difference I have money so that is not an issue.
thank you

 

DAMN thats got to be costy..

 

yeah, it was but i saved alot over the past few years a little here and a little there and with me deployed to iraq im able to save up a little more to do all i can possibly think of I hope im doing it right. alright come on guys i know someone can recommend a shop somewhere where they can do the job or someone.
oscar