The FD Restoration - $$$$ Damnit
#26
Full Member
Join Date: Aug 2005
Location: portland.or
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by afgmoto1978
Update
Got the fender that I won off of ebay; opened the package and I was like...WTF?! That's a green fender.
This picture of the interior shows how cheap my old paint job was.
Fender damage, going to have the body shop check if the chassis is even straight.
Soda Blaster guy is going to pick up the car Monday.
Peace
Got the fender that I won off of ebay; opened the package and I was like...WTF?! That's a green fender.
This picture of the interior shows how cheap my old paint job was.
Fender damage, going to have the body shop check if the chassis is even straight.
Soda Blaster guy is going to pick up the car Monday.
Peace
Can't wait to see it when it's done
#27
Dude, the first word out of his mouth after seeing that fender..."Gay!"
Well got more of the car apart, found 7 dolla in change, mostly pennies. Half of them embedded in the sound deadening or cough drop syrup. Found a few grapes and the carpet was wet with what must be 9 year old water. ewww
Dad is formally forbidden to have cough drops or grapes in the car as of now. Will get new carpet from the GB going on, will get black.
Okay pics:
Even without the motor the 7's got POWA!
What the back of the dash looks like and the HVAC unit, which is pretty simple.
Long *** engine harness that weighs 30 lbs.
And last, the yummy stuff found under the carpet.
Well got more of the car apart, found 7 dolla in change, mostly pennies. Half of them embedded in the sound deadening or cough drop syrup. Found a few grapes and the carpet was wet with what must be 9 year old water. ewww
Dad is formally forbidden to have cough drops or grapes in the car as of now. Will get new carpet from the GB going on, will get black.
Okay pics:
Even without the motor the 7's got POWA!
What the back of the dash looks like and the HVAC unit, which is pretty simple.
Long *** engine harness that weighs 30 lbs.
And last, the yummy stuff found under the carpet.
Last edited by afgmoto1978; 04-23-06 at 02:13 AM.
#32
Update, got the car back from the soda blaster. He did a pretty good job, missed a few things but all in all a good job.
Prep and bondo now
Speaking of bondo, I have some unexpected bondo on the driver side rear corner panel. I knew about the bondo on the passenger door. Remove and clean up for new stuff. Hoping the DR rear panel isn't fawked up too bad. Will find out tomorrow
Peace
Prep and bondo now
Speaking of bondo, I have some unexpected bondo on the driver side rear corner panel. I knew about the bondo on the passenger door. Remove and clean up for new stuff. Hoping the DR rear panel isn't fawked up too bad. Will find out tomorrow
Peace
#35
Full Member
Join Date: Aug 2005
Location: portland.or
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Hey Apex just told me he wants to know where you got that cool green fender.After what Mike did to his car he's thinking a bright green will be more obvious to see when someone is backing up a Suburban.I think he is looking for a custom pink interior also to match his panties also
3 MORE DAYS TILL VEGAS
3 MORE DAYS TILL VEGAS
#39
Senior Member
Join Date: Jan 2005
Location: Portland,oregon
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SPACE WRANGLER
Hey Apex just told me he wants to know where you got that cool green fender.After what Mike did to his car he's thinking a bright green will be more obvious to see when someone is backing up a Suburban.I think he is looking for a custom pink interior also to match his panties also
3 MORE DAYS TILL VEGAS
3 MORE DAYS TILL VEGAS
#40
Full Member
Join Date: Aug 2005
Location: portland.or
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cartapex
Space? Wife or not, when are you going to come out of the closet? Don't turn my agonizing smashed fender/bumper 7 concern into a chance for some gay rant that you put off on someone else because you are too chicken **** to out yourself. ***!! If you drink too much in Vegas and touch me in ANY way, I'll bury you in the desert!
#42
Full Member
Join Date: Aug 2005
Location: portland.or
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the thread jack
Now back on subject- so what color are you going to get it painted ? Are you going to have it done by the 19th for the next track day or are you and Apex going to share his car ? Hows the motor rebuild coming along
Now back on subject- so what color are you going to get it painted ? Are you going to have it done by the 19th for the next track day or are you and Apex going to share his car ? Hows the motor rebuild coming along
#43
I thinking either Gunmetal or Titanium Metallic Silver with a heavy metal flake content and blue pearl clear coat. I leaning more toward's Titanium grey from the RX-8/Mazda 6 and add more metal flake and just regular clear.
NOOOO, at the rate I'm going it's going to take forever it feels like. I need to get the ball rolling or have the car rolled over to the paint shop across the street to get it done in a reasonable time. Expensive though, Fawk!
We have to get Apex's car running properly first, still has a boost issue and a miner scratch on the driver side fender to fix.
NOOOO, at the rate I'm going it's going to take forever it feels like. I need to get the ball rolling or have the car rolled over to the paint shop across the street to get it done in a reasonable time. Expensive though, Fawk!
We have to get Apex's car running properly first, still has a boost issue and a miner scratch on the driver side fender to fix.
#44
Well found more bondo on the driver & passenger side under paneling. Did some more paint removal, two more days of this and a frame straightening and it will be ready for new bondo and primer/sealer.
I found out my car has a cocaine problem! see's be off of it by the time I'm done, I hope.
I found out my car has a cocaine problem! see's be off of it by the time I'm done, I hope.
Last edited by afgmoto1978; 05-07-06 at 11:59 PM.
#45
Good news, all my one piece ceramic apex seals are good except for the broken one. So, I only have to buy one replacement and a shyte load of other stuff tonight. Yaaa, I need a second Job, Yaaaa.
Last edited by afgmoto1978; 05-09-06 at 08:43 PM.
#46
N3y2-10-s80 - Housing, Rotor - Rear $529.25 $529.25
1881-11-404 - Seal,oil $1.45 $1.45
N326-11-d03 - Bearing, Pilot $6.00 $6.00
Nf01-11-d54 - Bearing,needle $17.70 $17.70
Nf01-11-d53 - Washer,thrust $5.60 $5.60
N3a1-11-d00 - Shaft $341.40 $341.40
4352-11-363 - Spring, Rear Outer Oil Seal $3.35 $6.70
4352-11-353 - Spring, Oil Seal - Front Outer $3.35 $6.70
1202-11-343 - O-ring, Outer Oil Control $13.00 $52.00
0820-11-341 - O-ring, Inner Oil Seal $6.70 $26.80
Nf01-11-c17 - Spring, Side Seal $4.30 $51.60
4801-10-502 - Bearing, Competition Main $76.40 $76.40
4801-11-111 - Bearing, Competition Rotor $86.05 $172.10
Nf01-11-c24 - Spring,corner Seal $1.85 $22.20
8871-23-180 - Seal Set $54.30 $217.20
N3a1-10-507 - Seal, Front Main Oil $6.35 $6.35
1668-10-556a - Seal,oil $6.60 $6.60
Fd01-56-191a - Protector,pipe $10.35 $10.35
Fd01-43-860e - Insulator,master Vac $52.50 $52.50
B455-32-279 - $5.05 $10.10
P043-27-238 - $4.65 $9.30
P011-25-123 - $2.30 $9.20
1368-25-124 - $1.85 $7.40
E016-50-796 - $1.35 $2.70
G225-51-274b - Lens, License Lamp $4.00 $4.00
G225-51-273 - Gasket $2.05 $2.05
Ea04-51-146a - - $0.95 $0.95
Fd01-50-6g0b - Rr Window Mould $67.45 $67.45
Fd01-50-6ax - Mldg Up, Frt Wndw $44.25 $44.25
Fd01-34-313 - Ball Joint Boot $8.70 $17.40
Fd01-34-213 - Boot, Ball $9.00 $18.00
Fd01-59-821 - W/strip Lt $33.95 $33.95
Fd01-58-821 - W/strip Rt $33.95 $33.95
B455-56-149 - $0.80 $12.80
Fd01-68-601b - Insulator, Hood $109.75 $109.75
Fd01-50-794a - Protector $8.00 $8.00
Ga7b-50-795 - Cap $1.35 $8.10
0118-56-242b - $0.65 $2.60
Fd01-50-640b - Mould Rt, Beltline $78.90 $78.90
Fd01-50-615 - Joint, B/wndw Mould $4.50 $4.50
Ea04-51-146a - - $0.95 $0.95
Fd01-51-674 - Clip $2.45 $2.45
Fd01-50-650d - Mould Lt, Beltline $78.90 $78.90
Fd01-50-619a - Clip $2.00 $2.00
Fd01-69-320c-02 - Sun Visor Lt $59.70 $59.70
Fd01-69-270c-02 - Sun Visor Rt $66.25 $66.25
Hg31-69-220b - $56.10 $56.10
R504-17-470a - Case, Control $51.00 $51.00
Je11-40-355 - $3.40 $13.60
N326-14-151 - Chain $22.80 $22.80
$2,448.00, More to come later.
1881-11-404 - Seal,oil $1.45 $1.45
N326-11-d03 - Bearing, Pilot $6.00 $6.00
Nf01-11-d54 - Bearing,needle $17.70 $17.70
Nf01-11-d53 - Washer,thrust $5.60 $5.60
N3a1-11-d00 - Shaft $341.40 $341.40
4352-11-363 - Spring, Rear Outer Oil Seal $3.35 $6.70
4352-11-353 - Spring, Oil Seal - Front Outer $3.35 $6.70
1202-11-343 - O-ring, Outer Oil Control $13.00 $52.00
0820-11-341 - O-ring, Inner Oil Seal $6.70 $26.80
Nf01-11-c17 - Spring, Side Seal $4.30 $51.60
4801-10-502 - Bearing, Competition Main $76.40 $76.40
4801-11-111 - Bearing, Competition Rotor $86.05 $172.10
Nf01-11-c24 - Spring,corner Seal $1.85 $22.20
8871-23-180 - Seal Set $54.30 $217.20
N3a1-10-507 - Seal, Front Main Oil $6.35 $6.35
1668-10-556a - Seal,oil $6.60 $6.60
Fd01-56-191a - Protector,pipe $10.35 $10.35
Fd01-43-860e - Insulator,master Vac $52.50 $52.50
B455-32-279 - $5.05 $10.10
P043-27-238 - $4.65 $9.30
P011-25-123 - $2.30 $9.20
1368-25-124 - $1.85 $7.40
E016-50-796 - $1.35 $2.70
G225-51-274b - Lens, License Lamp $4.00 $4.00
G225-51-273 - Gasket $2.05 $2.05
Ea04-51-146a - - $0.95 $0.95
Fd01-50-6g0b - Rr Window Mould $67.45 $67.45
Fd01-50-6ax - Mldg Up, Frt Wndw $44.25 $44.25
Fd01-34-313 - Ball Joint Boot $8.70 $17.40
Fd01-34-213 - Boot, Ball $9.00 $18.00
Fd01-59-821 - W/strip Lt $33.95 $33.95
Fd01-58-821 - W/strip Rt $33.95 $33.95
B455-56-149 - $0.80 $12.80
Fd01-68-601b - Insulator, Hood $109.75 $109.75
Fd01-50-794a - Protector $8.00 $8.00
Ga7b-50-795 - Cap $1.35 $8.10
0118-56-242b - $0.65 $2.60
Fd01-50-640b - Mould Rt, Beltline $78.90 $78.90
Fd01-50-615 - Joint, B/wndw Mould $4.50 $4.50
Ea04-51-146a - - $0.95 $0.95
Fd01-51-674 - Clip $2.45 $2.45
Fd01-50-650d - Mould Lt, Beltline $78.90 $78.90
Fd01-50-619a - Clip $2.00 $2.00
Fd01-69-320c-02 - Sun Visor Lt $59.70 $59.70
Fd01-69-270c-02 - Sun Visor Rt $66.25 $66.25
Hg31-69-220b - $56.10 $56.10
R504-17-470a - Case, Control $51.00 $51.00
Je11-40-355 - $3.40 $13.60
N326-14-151 - Chain $22.80 $22.80
$2,448.00, More to come later.
Last edited by afgmoto1978; 05-10-06 at 12:32 AM.
#49
Full Member
Join Date: Aug 2005
Location: portland.or
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Man thats a sweet color. Let me know when you are ready to get the paint I can get you a deal through either Dupont or PPG unless you can get a better deal through your work
#50
Originally Posted by afgmoto1978
N3y2-10-s80 - Housing, Rotor - Rear $529.25 $529.25
1881-11-404 - Seal,oil $1.45 $1.45
N326-11-d03 - Bearing, Pilot $6.00 $6.00
Nf01-11-d54 - Bearing,needle $17.70 $17.70
Nf01-11-d53 - Washer,thrust $5.60 $5.60
N3a1-11-d00 - Shaft $341.40 $341.40
4352-11-363 - Spring, Rear Outer Oil Seal $3.35 $6.70
4352-11-353 - Spring, Oil Seal - Front Outer $3.35 $6.70
1202-11-343 - O-ring, Outer Oil Control $13.00 $52.00
0820-11-341 - O-ring, Inner Oil Seal $6.70 $26.80
Nf01-11-c17 - Spring, Side Seal $4.30 $51.60
4801-10-502 - Bearing, Competition Main $76.40 $76.40
4801-11-111 - Bearing, Competition Rotor $86.05 $172.10
Nf01-11-c24 - Spring,corner Seal $1.85 $22.20
8871-23-180 - Seal Set $54.30 $217.20
N3a1-10-507 - Seal, Front Main Oil $6.35 $6.35
1668-10-556a - Seal,oil $6.60 $6.60
[...]
$2,448.00, More to come later.
1881-11-404 - Seal,oil $1.45 $1.45
N326-11-d03 - Bearing, Pilot $6.00 $6.00
Nf01-11-d54 - Bearing,needle $17.70 $17.70
Nf01-11-d53 - Washer,thrust $5.60 $5.60
N3a1-11-d00 - Shaft $341.40 $341.40
4352-11-363 - Spring, Rear Outer Oil Seal $3.35 $6.70
4352-11-353 - Spring, Oil Seal - Front Outer $3.35 $6.70
1202-11-343 - O-ring, Outer Oil Control $13.00 $52.00
0820-11-341 - O-ring, Inner Oil Seal $6.70 $26.80
Nf01-11-c17 - Spring, Side Seal $4.30 $51.60
4801-10-502 - Bearing, Competition Main $76.40 $76.40
4801-11-111 - Bearing, Competition Rotor $86.05 $172.10
Nf01-11-c24 - Spring,corner Seal $1.85 $22.20
8871-23-180 - Seal Set $54.30 $217.20
N3a1-10-507 - Seal, Front Main Oil $6.35 $6.35
1668-10-556a - Seal,oil $6.60 $6.60
[...]
$2,448.00, More to come later.