Okay. My studs are fucked up on my FC and instead of replacing the studs indivudually I figured it would be cheaper and faster to find some hubs with good studs. Cheaper yes, faster yes, easier...um no. I basically bought the whole assembly and cannot figure out how to get the front hubs off the knuckle. If anybody has a write up with detailed notes and pictures that would be awesome. Thanks.

 

I assume you mean ball joint by knuckle.

You must remove the bolt not just loosen it. then if you don't have a pickle fork, try prying it open slightly. to get it on I used a flat head screw driver as a wedge to hold it open and slide it down all the way or you'll **** the bolt up.