VDI actuator
07-26-17, 11:40 AM
#1
Junior Member
Thread Starter
Join Date: May 2015
Location: Orange County
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
VDI actuator
It's not holding pressure when I used the vacuum pump to test it. Can it be repaired? If not, where to source a replacement? Also, has anyone tried replacing it with the 6PI actuator? Thanks.
07-26-17, 05:21 PM
#2
Junior Member
Thread Starter
Join Date: May 2015
Location: Orange County
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Never mind.
I might look at the Mazda 626 VRIS actuators. They look similar and are also the push type (rod pushing out). The only thing I'm not sure is whether it's operated by vacuum or pressure. Time to hit the junk yard to find out.
I might look at the Mazda 626 VRIS actuators. They look similar and are also the push type (rod pushing out). The only thing I'm not sure is whether it's operated by vacuum or pressure. Time to hit the junk yard to find out.