New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Trouble Getting Car To Start

Thread Tools
 
Search this Thread
 
Old 06-17-09, 02:12 PM
  #1  
Junior Member
Thread Starter
 
Sick's Avatar
 
Join Date: Jun 2009
Location: RVA Soon To Be Texas
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Trouble Getting Car To Start

Curious if any of you have had this problem. I got a 86 Rx-7 and it was running fine one day and then couldn't get it to start. I proceeded to unflood it like the board says to but didn't help. Its making a high pitch whiny noise when I try to start it. Any idea of what could be wrong with it? The car won't jump and I just bought a new battery for it so what else could it be?
Old 06-18-09, 10:57 PM
  #2  
Junior Member
Thread Starter
 
Sick's Avatar
 
Join Date: Jun 2009
Location: RVA Soon To Be Texas
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Also forgot to mention its a 13b N/a with a rebuild 8k miles ago. Car is completely stock and I believe its a GXL. Not completely sure. It has spark and I'm pretty sure its getting fuel to the motor just don't know what else it could be. Could it just be the battery or maybe I'm doing something wrong when trying to unflood it? Not sure if it was truly flooded cause I drove it to work and got it heated up and everything just couldn't get it to start when I was leaving for lunch a good 3-4 hours later. Any advice would be greatly appreciated.
Old 06-22-09, 10:10 AM
  #3  
Full Member

 
-CON-'s Avatar
 
Join Date: Nov 2008
Location: Canada
Posts: 221
Likes: 0
Received 12 Likes on 5 Posts
This might help with a car that's flooded> have someone pull of both spark plugs wires of the leading coil and keep just near enough for the spark to jump, then crank it. It creates a better ark. Just who ever will do it shouldn't lean over the metal body parts or any contact with it, might not be pleasant , but I had started flooded cars in minus 20 Celsius by using this method. See if it works!
Old 06-22-09, 09:26 PM
  #4  
Junior Member
 
benrl's Avatar
 
Join Date: Jun 2009
Location: perris ca
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Go for a push start, works for me.
Old 06-26-09, 04:39 PM
  #5  
Senior Member

 
rx7freak13v's Avatar
 
Join Date: Jun 2008
Location: Summerfield,FL
Posts: 424
Likes: 0
Received 0 Likes on 0 Posts
if unflooding doesnt work,then go for the push start and if still no luck try checking ur coils to make sure they r firing right.if still no then run a compression check just to make sure,i kno its a rebuiild but still
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gtcd
1st Generation Specific (1979-1985)
30
08-19-15 02:44 AM
Junkee
New Member RX-7 Technical
2
08-15-15 01:57 PM
ashleymiche
Introduce yourself
0
08-14-15 12:59 PM



Quick Reply: Trouble Getting Car To Start



All times are GMT -5. The time now is 05:06 AM.