Transmission trouble
#1
Junior Member
Thread Starter
Join Date: Jun 2010
Location: Socal
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Transmission trouble
I'm having trouble trying to diagnose the issue with my 90 vert. I just baught the car used and after driving for a few hundred miles the car won't drive. I put it in reverse backed up a few feet the the car jolted like I popped the clutch and stalled instantly. Clutch feels fine. The car starts when I have the clutch in but as soon as I start to let off the car jolts, even if the shifter is in neutral. the previous owner said he rebuilt the tranny. I dropped the tranny out and the clutch plate looks fine. T/o bearing and fork are still in place an move freely. Clutch master/slave cylinder have no leaks.. Any thoughts??
#3
Whipping thru traffic.
iTrader: (12)
Join Date: Nov 2008
Location: In a box.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
Jack up the rear end, turn the passenger side rear wheel. Does the other wheel turn? If not, you have a bad part in the diff. I just broke a half shaft and it had a loud pop and the car wouldn't move after. I have to replace the diff now.
#5
Junior Member
Thread Starter
Join Date: Jun 2010
Location: Socal
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE: I checked the diff an it spun the wheels just fine so I took the tranny to the shop and got the update. The tranny was in pieces. It's getting rebuilt n I'll have it back by next week. Thanks for the suggestions guys.
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
2
10-09-15 02:19 AM