Swaping T2 transmission in N/A 89
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Dec 2015
Location: Yelm Washington
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Swaping T2 transmission in N/A 89
Hello New to the form
just bought a 89 rx-7 vert that needs a transmission swaped. I received a T2/transmission with the purchase. Just wanted to be clear on the interchange with t2 and N/a. Clutches and throwout Bearing starter pilot bushing drive spline and Anything I should know.???
just bought a 89 rx-7 vert that needs a transmission swaped. I received a T2/transmission with the purchase. Just wanted to be clear on the interchange with t2 and N/a. Clutches and throwout Bearing starter pilot bushing drive spline and Anything I should know.???
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
If you want to keep the rest of the NA drivetrain, then you need:
-TII flywheel
-TII clutch
-TII slave cylinder
-TII starter
-TII mount
Then a custom driveshaft to connect the longer transmission to the NA differential. Mazdatrix sells such a driveshaft here:
https://www.mazdatrix.com/g9.htm
Or you can have your local driveline shop make one up.
-TII flywheel
-TII clutch
-TII slave cylinder
-TII starter
-TII mount
Then a custom driveshaft to connect the longer transmission to the NA differential. Mazdatrix sells such a driveshaft here:
https://www.mazdatrix.com/g9.htm
Or you can have your local driveline shop make one up.
Thread
Thread Starter
Forum
Replies
Last Post