Suggested rim sizes for FDs
#1
Junior Member
Thread Starter
Join Date: Mar 2015
Location: Miami
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Suggested rim sizes for FDs
Hey guys, I was wondering what's the perfect size rim for FDs? I've never really bought rims for my cars, but I've always wanted too, yet I've realized that games like NFS Underground and Most Wanted always exaggerated rim sizes by making them look fitting at 20s in every car, but since the RX7 is a small car I find them too big or ricey for them. Do any of you guys have professional track cars? If so what rim size do you recommend for the car to look good as well as performing very good?
#4
Super Moderator
iTrader: (148)
You can find lots of useful info in the suspension/wheels/tires/brakes section of the forum. Here are a few threads:
https://www.rx7club.com/suspension-w...sizing-416251/
https://www.rx7club.com/suspension-w...ide-fd-892901/
https://www.rx7club.com/suspension-w...els-fd-621697/
All depends on what you want to do and what look you are going after.
Good luck
https://www.rx7club.com/suspension-w...sizing-416251/
https://www.rx7club.com/suspension-w...ide-fd-892901/
https://www.rx7club.com/suspension-w...els-fd-621697/
All depends on what you want to do and what look you are going after.
Good luck
#5
Here's another good thread-- https://www.rx7club.com/suspension-w...ed-here-41789/
#6
Urban Combat Vet
iTrader: (16)
255/40/17 on 17x9 +48 also fit without fender rolling or other interference except maybe for coilovers..which your's probably require too. And if the OP is looking for performance, all else being equal, the smaller wheel size will perform better as it takes less energy to turn and stop, and will be less un-sprung weight. While 255/40 255's is ~ 12.5 mm more aspect ration than the 255/35's, on a street car is also means a better ride, arguably better handling and less risk of wheel damage from hitting a rut or pot-hole. Depending on the particular tire, both will keep the speedometer pretty close.
Personal taste IMO.
Personal taste IMO.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM