steering rack Q's
Thread Starter
Can Post Only in New Member Section
Joined: Oct 2009
Posts: 2
Likes: 0
From: Birdsboro PA
steering rack Q's
hi im new here and i have a somewhat out of the ballpark question
i am currently putting a manual rack in my 89gtu
my rediculous question is, is it at all possible to swap the rack and pinion from a power steering model into a manual housing (better gearing, more sleek and clean look)
?
thanx
i am currently putting a manual rack in my 89gtu
my rediculous question is, is it at all possible to swap the rack and pinion from a power steering model into a manual housing (better gearing, more sleek and clean look)
?
thanx
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
There has been a write up on how to depower a power rack... But I'm not sure if anyone has put the guts of a power rack in a manual body...
I'd assume the pinion is a different length to connect to the valve body rather than connecting directly to the column.
I'd assume the pinion is a different length to connect to the valve body rather than connecting directly to the column.