New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

starting issue once warms up then cools

Thread Tools
 
Search this Thread
 
Old 01-16-10, 12:15 AM
  #1  
Junior Member
Thread Starter
 
alns-rx7's Avatar
 
Join Date: Jan 2010
Location: roanoke, VA
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
starting issue once warms up then cools

I have an 88turbo with a remanufactured engine with about 5k miles. It starts right up when it is cold, but is slow to warm up. (I am starting to wonder if it may not have a thermostat?) Once warm if I cut it off then come back while still relatively warm, it starts right up. If I wait until it cools off too much it does't want to start. I just cranks and cranks unless I floor it. Any ideas on what to do or what could be causing this and how to fix it? I don't want to get stranded.
Old 01-16-10, 10:25 AM
  #2  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
Have the injectors professionally cleaned. Check the operation of the CLT.
Old 01-16-10, 01:09 PM
  #3  
Junior Member
Thread Starter
 
alns-rx7's Avatar
 
Join Date: Jan 2010
Location: roanoke, VA
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
OK, any recomendations on places to clean injectors? I have never done anything like that so a lot of this is new to me. I know this may be dumb, but what is the CLT? Is that something a dealership will need to check? I just joined the rx7 club yesterday so I'm sure in time I will learn a lot of the abbreviations. Thanks for your help. I hate to sound like a moron, sorry.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
stickmantijuana
Microtech
30
04-23-16 06:37 PM
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM
PhillyFC
General Rotary Tech Support
9
08-21-15 06:36 PM



Quick Reply: starting issue once warms up then cools



All times are GMT -5. The time now is 07:28 PM.