Hi my name is shane, I was wondering on the fc, what would happen if you premix the gas with oil if the oil drip system still worked? I know that it is unnecessary but guess curious on the subject because I don't know anyone with rotary experience. So I thought I would ask this community!

 

as insurance,Yes you can
just don't go nuts on the Ratio.
If the OMP is working then 4 oz to a tank is plenty.(usually if the OMP is deleted it is 16oz for 16 gallons)

 

I use 1/4 oz per gallon with mop. No smoke. Insurance. Plus gives me more reasons to run to the parts store for oil.

 

Make sure you use 2 stroke oil . Not motor oil.

 

I've been premixing with a working omp. You can periodically check your engine oil level (as any auto owner should, let alone a rotary guy) to see if you are using oil, indicating that your omp pump is likely working if that's what you're concerned about.

 

thank you guys for the advice!! much appreciated!