Series of unfortunate low funds
#1
Junior Member
Thread Starter
Join Date: Jan 2016
Location: NC
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Series of unfortunate low funds
I have a 1981 Rx7 gsl that I swapped a 13bt and transmission from a 1989 Rx7. When I received the engine the ecu and harness was TRASH! So I decided to try and go old school and do a draw through turbo setup but with purchasing a house and having to get a new daily driver I'm having to scrap the turbo plan and run the engine naturally aspirated. I have a Weber dcoe 45 and an Atkins lake city style intake (really short runner meant for a 6 port) aside from finding someone willing to trade a N/A block for my turbo block, I need some help with tuning the carb for running it n/a. Any help would be appreciated.
#2
Moderator
iTrader: (2)
running a turbo engine n/a will be way down on power than what a normal n/a engine will be due to the lower compression ratio rotors of the t2 engine. if that lake cities intake u have is indeed for a 6 port, it wont work on the turbo engine as it's 4 port. a complete stand alone setup would be the way to go for the 13bt, but they're not cheap unless u can find one used. or get a running n/a 6 port and swap that carb and intake onto it and change front cover to change over from the CAS to a distributor. which would have to be changed anyway to utilize the front mount for the 81.
#3
Junior Member
Thread Starter
Join Date: Jan 2016
Location: NC
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
running a turbo engine n/a will be way down on power than what a normal n/a engine will be due to the lower compression ratio rotors of the t2 engine. if that lake cities intake u have is indeed for a 6 port, it wont work on the turbo engine as it's 4 port. a complete stand alone setup would be the way to go for the 13bt, but they're not cheap unless u can find one used. or get a running n/a 6 port and swap that carb and intake onto it and change front cover to change over from the CAS to a distributor. which would have to be changed anyway to utilize the front mount for the 81.
#4
Doritos & Dual Sports
iTrader: (8)
running a turbo engine n/a will be way down on power than what a normal n/a engine will be due to the lower compression ratio rotors of the t2 engine. if that lake cities intake u have is indeed for a 6 port, it wont work on the turbo engine as it's 4 port. a complete stand alone setup would be the way to go for the 13bt, but they're not cheap unless u can find one used. or get a running n/a 6 port and swap that carb and intake onto it and change front cover to change over from the CAS to a distributor. which would have to be changed anyway to utilize the front mount for the 81.
GL with your build
also if you want to sell that lake city's intake please let me know as I'd be interested
#6
Junior Member
Thread Starter
Join Date: Jan 2016
Location: NC
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#7
Junior Member
Thread Starter
Join Date: Jan 2016
Location: NC
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
naimodo
2nd Generation Specific (1986-1992)
35
09-19-16 08:11 PM