New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Saved 87 turboII from crusher!! Now I need help.

Thread Tools
 
Search this Thread
 
Old Apr 2, 2011 | 10:45 PM
  #1  
rapedaperacing's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Jan 2010
Posts: 1
Likes: 0
From: Mississippi
Saved 87 turboII from crusher!! Now I need help.

Hey guys! I found an 87 turboII at the local wrecking yard that was in line to be crushed much to my surprise it started right up,so I struck a deal 400$ and now it's mine the body is straight but it needs paint and the seats are trashed. Now the problem it starts and idles but when you try to drive it or even just rev it oveover 1500 rpms it bogs down really bad it doesn't die but icomes close to it any help would be appreciated! Thank you
Reply
Old Apr 3, 2011 | 09:52 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Fix any vacuum leaks.

Adjust the TPS.

Test the AFM.

Make sure the spark plug wires are in the correct order.

If all that checks out and the engine has compression, have the injectors professionally cleaned and flush out the fuel system.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Smokeyfb33
Old School and Other Rotary
10
Oct 1, 2015 12:10 PM




All times are GMT -5. The time now is 07:51 PM.