rx7 tII ignition problem
#1
Junior Member
Thread Starter
Join Date: Mar 2009
Location: danville
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
rx7 tII ignition problem
hi
I have an 87 tII and I am not getting any spark. here are the things that I have done
the resistances between the terminals on the coils are all less the zero
the voltage in series with the black and yellow wire is 6.8v for the leading coil and 7.0V for the trailing coils. I checked the fsm and they should be 12v, I think I am missing a ground somewhere. If anyone knows the system please help.
and if anyone knows what the condenser is
thanks for your time
rotarylocost7
I have an 87 tII and I am not getting any spark. here are the things that I have done
the resistances between the terminals on the coils are all less the zero
the voltage in series with the black and yellow wire is 6.8v for the leading coil and 7.0V for the trailing coils. I checked the fsm and they should be 12v, I think I am missing a ground somewhere. If anyone knows the system please help.
and if anyone knows what the condenser is
thanks for your time
rotarylocost7
#2
needs more track time
iTrader: (16)
Hmmm... A rotary locost sounds pretty cool.
I personally can't help you with your problem but do check the 2nd get FAQ.
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/frequently-asked-questions-2nd-generation-rx-7-faq-fc-494667/
I personally can't help you with your problem but do check the 2nd get FAQ.
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/frequently-asked-questions-2nd-generation-rx-7-faq-fc-494667/
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM