rx7 fc swap
03-02-10, 09:37 PM
#1
jackels fd
Thread Starter
Join Date: Mar 2008
Location: los angeles
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
rx7 fc swap
hello i have a 87 rx7 that im looking to do a 89-91 (s5) swap but i wanna know what i need to get first i have the motor,tranny,harness and ecu.....do i need a new drive shaft,sensors,coilpack or injectors thanks for your time
03-03-10, 01:14 PM
#2
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,841
Received 511 Likes
on
346 Posts
You had another thread that said that you were doing a Turbo swap into a N/A car.
Firstly, the S5 ECU will not plug into the S4's interior wiring harness. There will be some custom wiring that needs to be done.
Secondly, you will need a custom driveshaft made up to work with the small N/A rear end unless you swap out the rear differential to a turbo unit as well.
Firstly, the S5 ECU will not plug into the S4's interior wiring harness. There will be some custom wiring that needs to be done.
Secondly, you will need a custom driveshaft made up to work with the small N/A rear end unless you swap out the rear differential to a turbo unit as well.
