RX-7 Body
08-28-19, 03:36 AM
#1
Newbie
Thread Starter
Join Date: Aug 2019
Location: Wilkesboro, NC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RX-7 Body
I am wondering if it is possible to put a. 93 body on a 1991 convertible RX-7..
Any help would be greatly appreciated!!
Thanks, Sincerely
Majik38
Any help would be greatly appreciated!!
Thanks, Sincerely
Majik38
08-28-19, 10:58 AM
#2
One answer: Anything’s possible with enough money and ambition...and if you’re not concerned about performance.
A better answer: No. Both are essentially unibodies with unique subframe assemblies to accommodate the different suspensions, wheel bases and track widths. And that’s before you figure in the different chassis wiring, linkages and steering components.
My best answer: Just because it can be done doesn’t mean it should be done. It’s going backwards, like sticking a 911 body on a VW Beatle chassis. And since you asked if it was possible, I can guess you’re not capable of doing it yourself. So you’d be spending stupid silly amounts of money to have someone else do it.
A better answer: No. Both are essentially unibodies with unique subframe assemblies to accommodate the different suspensions, wheel bases and track widths. And that’s before you figure in the different chassis wiring, linkages and steering components.
My best answer: Just because it can be done doesn’t mean it should be done. It’s going backwards, like sticking a 911 body on a VW Beatle chassis. And since you asked if it was possible, I can guess you’re not capable of doing it yourself. So you’d be spending stupid silly amounts of money to have someone else do it.
Last edited by Sgtblue; 08-28-19 at 02:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post