New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Road noise

Thread Tools
 
Search this Thread
 
Old Feb 18, 2011 | 11:11 AM
  #1  
rlgilli's Avatar
Thread Starter
Gilli
 
Joined: Oct 2010
Posts: 3
Likes: 0
From: Ballwin MO.
MO Road noise

Could I get rid of some road noise if got my 88 conv. undercoated ?
Reply
Old Feb 18, 2011 | 03:17 PM
  #2  
CrimsonPride's Avatar
Senior Member
Tenured Member: 15 Years
iTrader: (12)
 
Joined: Mar 2010
Posts: 546
Likes: 6
From: B'ham, AL
Not sure but it could only help, if anything. There are spray cans of stuff you can use if you want to try it.

A lot of times I have noticed more road noise in cars it has been from tires that developed subtle imperfections. Speed rated tires can be worse about this as they are made from different rubber compounds than regular tires.
Reply
Old Feb 18, 2011 | 03:25 PM
  #3  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
A sound deadener like Dynamat will do the job. But it is a major chore to install it as the carpets must be removed to do the job properly.
Reply
Old Feb 19, 2011 | 10:54 AM
  #4  
rlgilli's Avatar
Thread Starter
Gilli
 
Joined: Oct 2010
Posts: 3
Likes: 0
From: Ballwin MO.
MO

Thanks, I'll look in to it more.
Reply
Old Feb 19, 2011 | 12:20 PM
  #5  
Sgtblue's Avatar
Urban Combat Vet
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Oct 2003
Posts: 12,160
Likes: 983
From: Mid-west
Remove the inside trim panels on the doors and carefully spray in rubberized undercoating on the inside of the door skin/sheet metal. I get the "low odor" version if possible. In addition to killing some noise it made my doors shut with a nice solid "thunk" too.
I saw a huge gain in road noise and cat-back drone at highway speed just by dynamating the spare-tire well (resonator) on my FD. And that's pretty easy to get too. But doing the entire floor and tunnel would be better.
Reply
Old Feb 19, 2011 | 07:48 PM
  #6  
CrimsonPride's Avatar
Senior Member
Tenured Member: 15 Years
iTrader: (12)
 
Joined: Mar 2010
Posts: 546
Likes: 6
From: B'ham, AL
Originally Posted by Sgtblue
Remove the inside trim panels on the doors and carefully spray in rubberized undercoating on the inside of the door skin/sheet metal. I get the "low odor" version if possible. In addition to killing some noise it made my doors shut with a nice solid "thunk" too.
There's something I've been wondering: Does the upgraded sound insulation on touring FDs include something in the doors also? In shopping for my FD I drove a base car. The doors sounded "tinny" or hollow, I would say when you close them. My touring does not do this. Just always wondered about this.

Last edited by CrimsonPride; Feb 19, 2011 at 07:50 PM.
Reply
Old Feb 19, 2011 | 11:41 PM
  #7  
Sgtblue's Avatar
Urban Combat Vet
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Oct 2003
Posts: 12,160
Likes: 983
From: Mid-west
AFAIK, there is no difference in what insulation MAZDA installed regardless of Base, Touring or R models. Nothing was "upgraded" over any of the other models in the Touring. If there as a difference it was probably something an owner did similar to what I just suggested.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Linda_Lovelace
General Rotary Tech Support
0
Sep 18, 2015 10:04 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 04:39 AM.