rev guage intermittent? help?
05-29-10, 05:22 AM
#1
Can Post Only in New Member Section
Thread Starter
Join Date: May 2010
Location: west midlands
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
rev guage intermittent? help?
Hi i have bought an FD3S and am totally in love with her. This is my first RX7 and have dreamed of owning one for ages. She has what i believe to be an earth fault.
Starts fine all guages set themselves. Sometimes the Rev guage works fine, sometimes inaccurate, and sometimes not at all. The oil pressure guage sets up at startup but when started does not work at all.
The reason i'm thinking an earth fault is that the rev guage is intrmittent when the indicators and/or other switches in the engine bay kick in.
Any ideas or wiring diagrams i can use to maybe suss out the problem?
All help very much appreciated Thanks in advance
Kelly x
Starts fine all guages set themselves. Sometimes the Rev guage works fine, sometimes inaccurate, and sometimes not at all. The oil pressure guage sets up at startup but when started does not work at all.
The reason i'm thinking an earth fault is that the rev guage is intrmittent when the indicators and/or other switches in the engine bay kick in.
Any ideas or wiring diagrams i can use to maybe suss out the problem?
All help very much appreciated Thanks in advance
Kelly x
05-31-10, 03:31 PM
#3
Can Post Only in New Member Section
Thread Starter
Join Date: May 2010
Location: west midlands
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
ok i have searched through the FAQ, took me ages and its mostly about the forum.
Do you mean the archive 3rd gen specific? Theres loads there but cant find a specific wiring diagrams page just loads of questions.
Do you mean the archive 3rd gen specific? Theres loads there but cant find a specific wiring diagrams page just loads of questions.
05-31-10, 05:10 PM
#4
It's listed under "Factory Service Manuals" in the F section: https://www.rx7club.com/3rd-generation-specific-1993-2002-16/94-fsms-available-download-449950/.
06-01-10, 04:34 PM
#5
Can Post Only in New Member Section
Thread Starter
Join Date: May 2010
Location: west midlands
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thank you, i have clicked the link and will now read through the info like a sponge!
I would not have found that if u had not shown me.
Thanks again I shall let u know if i solve the problem.
I would not have found that if u had not shown me.
Thanks again I shall let u know if i solve the problem.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM