With PFC fd3s won't start cold
With PFC fd3s won't start cold
Hi all
Very new to rx7s so hope some one can help with standard ecu car starts fine from cold then if I swap to Pfc while car is warmed up car starts fine but next day from cold
Won't start tries to rx in question is 92 fd3s jap import car is in the uk
Any tips thanks mark
Very new to rx7s so hope some one can help with standard ecu car starts fine from cold then if I swap to Pfc while car is warmed up car starts fine but next day from cold
Won't start tries to rx in question is 92 fd3s jap import car is in the uk
Any tips thanks mark
The map is the base map that comes pre installed
Ok thanks mate
Any ideas. Loving rx7s but dam they are tempramental , if I buy a data log
Is there a download site with maps,
As rx7 tuners in London are hard to find
Mark
Any ideas. Loving rx7s but dam they are tempramental , if I buy a data log
Is there a download site with maps,
As rx7 tuners in London are hard to find
Mark
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
I let the Tuners do the Tuning..I stick with wrenches.
If you find the "golden BB" of a tuning MAP site then you'd be the talk of London.
I know guys love to make money so for that fact they have there are those that Pay or get paid for any maps.
Personally I have been asked to "give a map out" but Hell!, I PAID for a tuner to come and tune my car.I am NOT giving away anything!
I wish you luck though.
If you find the "golden BB" of a tuning MAP site then you'd be the talk of London.
I know guys love to make money so for that fact they have there are those that Pay or get paid for any maps.
Personally I have been asked to "give a map out" but Hell!, I PAID for a tuner to come and tune my car.I am NOT giving away anything!
I wish you luck though.
....and more importantly, each car needs a different map even with the same mods it all depends on multiple factors that can be logged and understood by a pro rotary tuner... that's your best bet
It's expensive but your car will run best that way
edit: if you turn on acc, and have the PFC commander there's some way you can reset the map... try to navigate the commander or search how to reset it on the internet because any map on your PFC won't fit your car!!!! (it won't even start lol!)
If you run twin turbos non sequential, you will also need to modify that parameter before proceding to the startup tune... it's accessible through the commander's menus
Once you restart it, there's an easy procedure to let the pfc learn your car and idle, the procedure can be found on the forum just scroll through the FAQ and find PFC startup tune FAQ.
Keep in mind that this basic startup tune will only let you use your car for low-end driving... please don't run it higher than 3-4k rpm until you haven't got it tuned, especially if you've got multiple performance mods!!!
It's expensive but your car will run best that way
edit: if you turn on acc, and have the PFC commander there's some way you can reset the map... try to navigate the commander or search how to reset it on the internet because any map on your PFC won't fit your car!!!! (it won't even start lol!)
If you run twin turbos non sequential, you will also need to modify that parameter before proceding to the startup tune... it's accessible through the commander's menus
Once you restart it, there's an easy procedure to let the pfc learn your car and idle, the procedure can be found on the forum just scroll through the FAQ and find PFC startup tune FAQ.
Keep in mind that this basic startup tune will only let you use your car for low-end driving... please don't run it higher than 3-4k rpm until you haven't got it tuned, especially if you've got multiple performance mods!!!
Last edited by max0911; Jan 22, 2014 at 07:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM




