New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Passenger Power Window Switch Not Working

Thread Tools
 
Search this Thread
 
Old 11-27-16, 02:37 PM
  #1  
Junior Member
Thread Starter
 
atmorris7's Avatar
 
Join Date: Nov 2016
Location: NC
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Passenger Power Window Switch Not Working

My passenger power window switch will not work in my 88 RX7 convertible. Have replaced with a new one and still will not work. Any thoughts where to check next?

Last edited by atmorris7; 11-27-16 at 02:39 PM. Reason: Forgot to say which car
Old 11-27-16, 02:54 PM
  #2  
Moderator

iTrader: (1)
 
satch's Avatar
 
Join Date: Jun 2005
Location: tulsa,ok.
Posts: 11,738
Received 12 Likes on 11 Posts
Does the driver switch work both windows properly?

Last edited by satch; 11-27-16 at 03:00 PM.
Old 11-29-16, 01:36 PM
  #3  
Junior Member
Thread Starter
 
atmorris7's Avatar
 
Join Date: Nov 2016
Location: NC
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Yes, the driver side works for both the passenger and driver side.
Old 11-29-16, 02:07 PM
  #4  
Moderator

iTrader: (1)
 
satch's Avatar
 
Join Date: Jun 2005
Location: tulsa,ok.
Posts: 11,738
Received 12 Likes on 11 Posts
There's a power switch on the driver switch which overrides the passenger switch. Place the switch to the position which allows the passenger switch to work on its own. Next, check the Black/Blue wire at the passenger switch for power w/key to on. This wire requires voltage for the switch to work. No voltage no worky.
Old 11-29-16, 04:06 PM
  #5  
Junior Member
Thread Starter
 
atmorris7's Avatar
 
Join Date: Nov 2016
Location: NC
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Thanks, I will try that!
Old 12-17-16, 11:37 AM
  #6  
Junior Member
 
mateush's Avatar
 
Join Date: Dec 2015
Location: Poland
Posts: 22
Received 0 Likes on 0 Posts
I had the same problem.

I opened the driver side switch and cleaned the "power switch". You can use the multimeter to check if the electricity flow is OK.




All times are GMT -5. The time now is 03:00 AM.